2020-UP JEEP GLADIATOR JT 2.5" STAGE 4 SUSPENSION SYSTEM

The Stage 4 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for drastically improving on-road ride quality and overall performance for the daily driven application that will see frequent, moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).

2.5" lift height
Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
2.0 Aluminum Series shocks with vehicle specific valving
Front and rear track bars ensure proper alignment and improved articulation
Adjustable, billet aluminum front sway bar links
100% bolt-on system makes for an easy install
“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
Fits 35" tires (37" with extended bump stop spacer kit)
33% front, 23% rear increase in wheel travel
Improves on and off-road ride quality over stock
Front lower links included for caster angle correction and improved front end articulation
Dual rate front coil springs with lifetime guarantee against sagging/breakage

Information:

Ships In Multiple Boxes

Application Summary:

Year	Make/Model
2020-2022	Jeep Gladiator

This item is a package with the following components:

ICON Vehicle Dynamics 22021 Front Fixed Lo..

Brand: ICON Vehicle Dynamics

Part Number: 22021

ICON’s tubular front lower link arms are a significant upgrade over factory units due to increases i..

Call for Pricing

ICON Vehicle Dynamics 22025 2.5 Front Dual..

Brand: ICON Vehicle Dynamics

Part Number: 22025

Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial ra..

Call for Pricing

ICON Vehicle Dynamics 22027 Front Adjustab..

Brand: ICON Vehicle Dynamics

Part Number: 22027

This ICON adjustable track bar will allow the proper alignment of your lifted truck’s steering geome..

Call for Pricing

ICON Vehicle Dynamics 22061 Front Sway Bar..

Brand: ICON Vehicle Dynamics

Part Number: 22061

These billet aluminum front sway bar links correct the sway bar angle in vehicles with 2.5" of lift...

Call for Pricing

ICON Vehicle Dynamics 22062 Rear Sway Bar ..

Brand: ICON Vehicle Dynamics

Part Number: 22062

2020-UP JEEP GLADIATOR JT REAR SWAY BAR RELOCATION KITThis billet aluminum sway bar relocation kit f..

Call for Pricing

ICON Vehicle Dynamics 22066 1.5 Rear Multi..

Brand: ICON Vehicle Dynamics

Part Number: 22066

Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial ra..

Call for Pricing

ICON Vehicle Dynamics 22068 Rear Adj Track..

Brand: ICON Vehicle Dynamics

Part Number: 22068

2020-UP JEEP GLADIATOR JT REAR ADJUSTABLE TRACK BAR KITUpgrading your Jeep Gladiator's rear track ba..

Call for Pricing

ICON Vehicle Dynamics 26523 2.5 Front Shoc..

Brand: ICON Vehicle Dynamics

Part Number: 26523

ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and wee..

Call for Pricing

ICON Vehicle Dynamics 26527 2.5 Rear Shock

Brand: ICON Vehicle Dynamics

Part Number: 26527

ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and wee..

Call for Pricing

Attributes
AAP_UDA_12	EA
AAP_UDA_22	1
AAP_UDA_4	55
Add-On Part	191014 - .25" COLLAR SPANNER PIN WRENCH, 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
California Proposition 65	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Country of Origin (Primary)	US
GTIN	00840103415888
Harmonized Tariff Code (Schedule B)	8708807000
Hazardous Material Code	N
Life Cycle Status Code	Available to Order
NAFTA Preference Criterion Code	C
OEM Wheels & Tires Fitment	Yes, Yes
Recommended Aftermarket Tires	35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071), 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
Recommended Aftermarket Wheels	ICON Alloys
SDR Required Flag	N