2020-UP JEEP GLADIATOR JT REAR ADJUSTABLE TRACK BAR KIT
The ICON Tubular Rear Track Bar helps center the axle of your lifted 2020-2023 Jeep Gladiator or 2019-2023 Ram 1500 to allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1¼ x .250 wall 1026 DOM tubing with CNC machined threaded end and bushing housing. It has a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
The ICON Tubular Rear Track Bar helps center the axle of your lifted 2020-2023 Jeep Gladiator or 2019-2023 Ram 1500 to allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1¼ x .250 wall 1026 DOM tubing with CNC machined threaded end and bushing housing. It has a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
- Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
- On vehicle adjustable for precise track alignment using ICON’s Double Adjuster
- Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness
- Easy install into OEM mounts w/ application specific hardware
- Allows for full suspension articulation without binding
- Dual stage powder coat finish provides excellent corrosion resistance
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
Information:
TECH NOTE: Will not fit 2019-2023 Ram 1500 Classic modelsApplication Summary:
| Year | Make/Model |
|---|---|
| 2020-2023 | Jeep Gladiator |
| 2019-2023 | Ram 1500 |
This item is a component of the following packages: K22104, K22106, K22108T, K22105T, K22107T, K22108, K22105, K22107
| Attributes | |
| AAP_UDA_12 | EA |
| AAP_UDA_22 | 1 |
| AAP_UDA_4 | 55 |
| Add-On Part | 191014 - .25" COLLAR SPANNER PIN WRENCH, 191014 - .25" COLLAR SPANNER PIN WRENCH |
| Adjustable | Yes |
| Ball Joint Included | Yes |
| Bushing Color | Black |
| Bushing Material | Polyurethane, Polyurethane |
| Bushings Included | Yes |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Black |
| Country of Origin (Primary) | US |
| Dust Boot Included | No |
| End 1 Type | Bushing |
| End 2 Terminal Type | Rod End Bearing, Rod End Bearing |
| End 2 Type | Rod End Bearing, Rod End Bearing |
| Finish | Powdercoated |
| GTIN | 00840103408651 |
| Grade Type | Performance |
| Greasable | No |
| Grease Fitting Included | No |
| Greaseable | No |
| Harmonized Tariff Code (Schedule B) | 8708807000 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Material | Steel |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | C |
| Pre-Greased | No |
| SDR Required Flag | N |