2018-2021 Jeep JL 2Dr 3in Suspension Lift Fox Adv. Shocks
Designed as a complete system, this 3" lift includes everything necessary to properly lift your new Wrangler JL while allowing clearance for 35-37" tires. The extra ride height comes from a set of replacement JL-specific coil springs at each corner. These springs are engineered for additional ride height, improved suspension articulation, and to provide an custom-tailored "spring rate" to compensate for the mass of aftermarket wheels/tires and extra gear / off-roading equipment. In additional to replacement coil springs and shocks, this kit includes front lower control arm cam washers to correct caster alignment. Extended-length, heavy-duty front and rear sway bar links are supplied to correct sway bar geometry, while bump stop extensions limit suspension up-travel. Wrapping up this kit is a heavy-duty rear track bar bracket, used to re-center the rear axle and all the necessary hardware required to complete the full install.
Designed as a complete system, this 3" lift includes everything necessary to properly lift your new Wrangler JL while allowing clearance for 35-37" tires. The extra ride height comes from a set of replacement JL-specific coil springs at each corner. These springs are engineered for additional ride height, improved suspension articulation, and to provide an custom-tailored "spring rate" to compensate for the mass of aftermarket wheels/tires and extra gear / off-roading equipment. In additional to replacement coil springs and shocks, this kit includes front lower control arm cam washers to correct caster alignment. Extended-length, heavy-duty front and rear sway bar links are supplied to correct sway bar geometry, while bump stop extensions limit suspension up-travel. Wrapping up this kit is a heavy-duty rear track bar bracket, used to re-center the rear axle and all the necessary hardware required to complete the full install.
- F/R coil springs to set ride height, maintain ride and improve articulation
- Nitro-series gas shocks for smooth on/off-road performance
- F/R extended sway bar links to correct sway bar operating angle
- F/R bump stop extensions to properly limit suspension up travel
- Front LCA cam washers to correct front end caster
- Rear track bar bracket to recenter rear axle
- Allows clearance for 35-37" tires
Application Summary:
| Year | Make/Model |
|---|---|
| 2018-2024 | Jeep Wrangler |
This item is a package with the following components:
| Attributes | |
| Accommodates Factory Wheels | No |
| Adjustable | No |
| Alternate Part Number | ZONJ33F |
| Back Spacing | 4.5" |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Emission Code | Legal US |
| Finish | Powdercoat |
| Front Lift Height | 3" |
| Front Lift Method | Coil Springs |
| GTIN | 00810156367502 |
| Hazardous Material Code | N |
| Installation Difficulty | 2 out of 5 |
| Installation Time | 2.5 hrs |
| Life Cycle Status Code | Available to Order |
| Lift Type | Lift Kit |
| Material | Steel |
| Max Tire Size | 35 x 12.5 |
| NAFTA Preference Criterion Code | B |
| Rear Lift Height | 3" |
| Rear Lift Method | Coil Springs |
| Required Tools | Torx Bit / Socket Set; Wrenches: Standard |
| Requires Metal Cutting | No |
| Requires Welding | No |
| SDR Required Flag | N |
| Wheel Size | 17 x 9 |
Zone Offroad Products ZONJ33F Zone 3 Suspension Lift Kit
Product Information
- Brand: Zone Offroad Products
- Product Number: ZONJ33F
This item is a package with the following components: FOX98450922, FOX98450929, ZONJ1321