Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 2WD 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel travel.
- Brake line relocation brackets increase wheel travel and allow use of factory brake lines
- Bump stop extensions properly limit up-travel, protecting your vehicle
- Full length replacement coil springs add additional ride height while maintaining ride quality
- Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll
- Rear track bar bracket correctly positions rear axle under vehicle
Information:
2012-18 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories. Stock Control Arms? Alignment cam locks will add 2 degrees of caster when used on stock length control arms, which will better align your wheels. Wheels / Tires: Factory wheels cannot be reinstalled with lift kit due to rear sway bar interference. Follow recommended wheel/tire specifications for proper clearance. Will work on Rubicon models.Application Summary:
| Year | Make/Model |
|---|---|
| 2007-2011 | Jeep Wrangler |
This item is a package with the following components:
| Attributes | |
| Accommodates Factory Wheels | No |
| Adjustable | No |
| Alternate Part Number | ZONJ12 |
| Back Spacing | 4.5" |
| Back Spacing 2 | 4.5" |
| Back Spacing 3 | 4.5" |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Emission Code | Legal US |
| Front Lift Height | 3" |
| Front Lift Method | Coil Springs |
| GTIN | 00810156367076 |
| Hazardous Material Code | N |
| Installation Difficulty | 2 out of 5 |
| Installation Time | 4.5 hrs |
| Life Cycle Status Code | Available to Order |
| Lift Type | Lift Kit |
| Max Tire Size | 35 x 12.5 |
| Max Tire Size 2 | 35 x 12.5 |
| Max Tire Size 3 | 35 x 12.5 |
| NAFTA Preference Criterion Code | B |
| Rear Lift Height | 3" |
| Rear Lift Method | Coil Springs |
| Requires Metal Cutting | No |
| Requires Welding | No |
| SDR Required Flag | N |
| Wheel Size | 16 x 8 |
| Wheel Size 2 | 17 x 9 |
| Wheel Size 3 | 18 x 9 |
Zone Offroad Products ZONJ12 Zone 3 Coil Spring Lift Kit
Product Information
- Brand: Zone Offroad Products
- Product Number: ZONJ12
This item is a package with the following components: ZONJ1310