Take your Super Duty to new heights with this 6" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for 38" tires.
- High strength front coil springs improve ride quality
- HD radius arm to correct caster while maximizing ground clearance
- Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle
- Bump stop relocation, sway bar relocation and brake line relocation to maintain factory-like operating angles
- Replacement rear lift blocks, add-a-leafs and u-bolts to lift and level the stance
Information:
38x13.50 tires may require minor trimming.
Diesel Model Only.
Factory wheels fit when paired with factory / original equipment tire size.
Check your rear springs to determine if your truck is equipped with standard, 2-leaf main, or heavy payload 3-leaf main spring pack with an overload spring; see "Learn More" image for help.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Application Summary:
| Year |
Make/Model |
| 2017-2019 |
Ford F-250 Super Duty |
| 2017-2019 |
Ford F-350 Super Duty |
This item is a package with the following components:
| Attributes |
| Adjustable |
No |
| Alternate Part Number |
ZONF52 |
| Back Spacing |
5" |
| Back Spacing 2 |
5" |
| Back Spacing 3 |
5" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Front Lift Height |
6" |
| Front Lift Method |
Coil Springs & Replacement Radius Arms |
| GTIN |
00810156365980 |
| Hazardous Material Code |
N |
| Installation Difficulty |
3 out of 5 |
| Installation Time |
7 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Max Tire Size |
38 x 13.5 |
| Max Tire Size 2 |
38 x 13.5 |
| Max Tire Size 3 |
38 x 13.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
5" |
| Rear Lift Method |
Add-A-Leaf & Cast Block |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Type |
Single Stabilizer |
| Wheel Size |
17 x 10 |
| Wheel Size 2 |
18 x 10 |
| Wheel Size 3 |
20 x 10 |
