Take your F150 to new heights with this 4" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.
- High strength crossmembers to correct lower control arm positioning
- Ductile iron steering knuckles to correct steering geometry and maintain ESC system compatibility
- Top mounted strut spacers to provide lift and install easily
- Differential skid plate for improved offroad protection
- Rear lift blocks and u-bolts to lift and level the stance
- Sway bar, brake line and bump stop relocation brackets to correct operating angles
Information:
AWD models will require front driveshaft modification.
If using 18x9 wheels with 5.5" backspace, fit the wheels before mounting to check for proper tie rod clearance. Wheel manufacturing variances may affect this clearance.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Vehicles equipped with factory power steps will require E-Brake Relocation Bracket F5608.
Will not work with 17" wheels.
Application Summary:
| Year |
Make/Model |
| 2014 |
Ford F-150 |
This item is a package with the following components:
| Attributes |
| Accommodates Factory Wheels |
See Notes |
| Adjustable |
No |
| Alternate Part Number |
ZONF41 |
| Back Spacing |
5" |
| Back Spacing 2 |
5.5" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Finish |
Powdercoat |
| Front Lift Height |
4" |
| Front Lift Method |
Knuckle & Strut Spacer |
| GTIN |
00810156365744 |
| Hazardous Material Code |
N |
| Installation Difficulty |
3 out of 5 |
| Installation Time |
7 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Max Tire Size |
35 x 12.5 |
| Max Tire Size 2 |
35 x 12.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
4" |
| Rear Lift Method |
Cast Blocks |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Wheel Size |
18 x 9 |
| Wheel Size 2 |
20 x 9 |
