Take your F150 to new heights with this 6" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear a block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
- Heavy-duty differential skid slate improves offroad protection
- High-strength, 1/4" steel construction crossmembers correct lower control arm geometry
- High-strength, CNC machined, replacement steering knuckles improve strength while correcting steering angles
- Lift system does not change the front track width of the vehicle
Information:
Lift Block Selection: This kit is offered with either 4" or 5" rear lift block kit and in either case it will replace the factory rear blocks. The 5" block will net a level to slightly tail high stance, the 4" block will net a level to slightly tail low stance. Choose rear lift height based on your ride height preference. Power steps? If your vehicle is equipped with factory power steps, it will require E-Brake Relocation Bracket. Add in configuration / checkout. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: May require bumper or fender trimming depending on wheel and tire choice. See installation instructions for more information.This item is a package with the following components:
Attributes | |
Accommodates Factory Wheels | See Notes |
Adjustable | No |
Alternate Part Number | ZONF40 |
Back Spacing | 5" |
Back Spacing 2 | 5.5" |
Back Spacing 3 | 5.5" |
California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Country of Origin (Primary) | US |
Emission Code | Legal US |
Front Lift Height | 6" |
Front Lift Method | Knuckle & Strut Spacer |
GTIN | 00810156365720 |
Hazardous Material Code | N |
Installation Difficulty | 3 out of 5 |
Installation Time | 8 hrs |
Life Cycle Status Code | Available to Order |
Lift Type | Lift Kit |
Max Tire Size | 35 x 12.5 |
Max Tire Size 2 | 37 x 12.5 |
Max Tire Size 3 | 37 x 12.5 |
NAFTA Preference Criterion Code | B |
Rear Lift Height | 5" |
Rear Lift Method | Cast Blocks |
Requires Metal Cutting | No |
Requires Welding | No |
SDR Required Flag | N |
Wheel Size | 18 x 9 |
Wheel Size 2 | 20 x 9 |
Wheel Size 3 | 22 x 9 |