Take your RAM 2500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from front/rear coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
- Progressive rate front and rear coil springs improve ride quality and offroad performance while lifting and levelign the stance
- HD radius arm to correct caster while maximizing ground clearance
- Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle
- Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles
- Bump stop extensions, track bar bracket and sway bar correction to correct suspension geometry
Information:
Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
Fitment: Does NOT work for models with factory rear airbag suspension.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Will not fit Power Wagon models.
Application Summary:
Year |
Make/Model |
2014-2018 |
Ram 2500 |
This item is a package with the following components:
Attributes |
Accommodates Factory Wheels |
See Notes |
Adjustable |
No |
Alternate Part Number |
ZOND58 |
Back Spacing |
4.5" |
Back Spacing 2 |
5.75" |
Back Spacing 3 |
5.75" |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Country of Origin (Primary) |
US |
Emission Code |
Legal US |
Finish |
Powdercoat |
Front Lift Height |
6.5" |
Front Lift Method |
Radius Arm Drop |
GTIN |
00810156363771 |
Hazardous Material Code |
N |
Installation Difficulty |
3 out of 5 |
Installation Time |
6 hrs |
Life Cycle Status Code |
Available to Order |
Lift Type |
Lift Kit |
Max Tire Size |
37 x 12.5 |
Max Tire Size 2 |
37 x 12.5 |
Max Tire Size 3 |
37 x 12.5 |
NAFTA Preference Criterion Code |
B |
Rear Lift Height |
4.5" |
Rear Lift Method |
Coil Springs |
Requires Metal Cutting |
No |
Requires Welding |
No |
SDR Required Flag |
N |
Wheel Size |
17 x 9 |
Wheel Size 2 |
18 x 9 |
Wheel Size 3 |
20 x 9 |