Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arm relocation brackets to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance
- Full length replacement coil springs add additional ride height while maintaining ride quality
- High-strength control arm relocation brackets correct suspension geometry and add rigidity
Information:
Driveline Notice: Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate t-case indexing kit to reduce front driveline angle.
Fitment: Does NOT work for models with factory rear airbag suspension.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Application Summary:
| Year |
Make/Model |
| 2013-2018 |
Ram 3500 |
This item is a package with the following components:
| Attributes |
| Accommodates Factory Wheels |
See Notes |
| Adjustable |
No |
| Alternate Part Number |
ZOND50 |
| Back Spacing |
5.75" |
| Back Spacing 2 |
5.75" |
| Back Spacing 3 |
4.5" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Finish |
Powdercoat |
| Front Lift Height |
4.5" |
| Front Lift Method |
Radius Arm Drop |
| GTIN |
00810156363627 |
| Hazardous Material Code |
N |
| Installation Difficulty |
3 out of 5 |
| Installation Time |
5 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Material |
Steel |
| Max Tire Size |
37 x 12.5 |
| Max Tire Size 2 |
37 x 12.5 |
| Max Tire Size 3 |
35 x 12.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
3" |
| Rear Lift Method |
Cast Blocks |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Wheel Size |
20 x 9 |
| Wheel Size 2 |
17 x 9 |
| Wheel Size 3 |
17 x 9 |
