Step up to our highest lift that will let you clear 38" tires, but will still leave you in control. This coil spring and cast block lift is the easy and affordable way to create the truck you’ve always wanted. Fits Diesel 4WD 2009 - 2013 Dodge / Ram 2500 / 3500.
- 100% bolt-on design for easy installation
- High-strength control arm relocation brackets correct suspension geometry and add rigidity
Information:
Diesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended.
Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Application Summary:
| Year |
Make/Model |
| 2009-2010 |
Dodge Ram 2500 |
| 2009-2010 |
Dodge Ram 3500 |
| 2011-2013 |
Ram 2500 |
| 2011-2012 |
Ram 3500 |
This item is a package with the following components:
| Attributes |
| Accommodates Factory Wheels |
See Notes |
| Adjustable |
No |
| Alternate Part Number |
ZOND36 |
| Back Spacing |
5" |
| Back Spacing 2 |
5" |
| Back Spacing 3 |
5" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Finish |
Powdercoat |
| Front Lift Height |
8" |
| Front Lift Method |
Coil Springs |
| GTIN |
00810156363306 |
| Hazardous Material Code |
N |
| Installation Difficulty |
3 out of 5 |
| Installation Time |
7 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Max Tire Size |
38 x 13.5 |
| Max Tire Size 2 |
38 x 13.5 |
| Max Tire Size 3 |
38 x 13.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
5" |
| Rear Lift Method |
Cast Blocks |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Wheel Size |
17 x 9 |
| Wheel Size 2 |
18 x 9 |
| Wheel Size 3 |
20 x 9 |
