Press-In Style, 1/2-20 x 2-7/8 Inch Long, Stud Knurl Diameter .660 Inch (Hole Diameter .641 Inch). Grade-8 Steel with Black Oxide Finish. Set Of 10 Pieces.
NHRA Approved. Extra long wheel studs are used in competition applications where open end lug nuts are used to show full lug engagement. They are also used in applications where thicker/wider wheels or the use of wheel spacers requires a longer than stock wheel stud. These Grade 8 press-in wheel studs have a black oxide finish. 1/2-20 thread and 2-7/8 inch long with an approximately .660 inch knurl diameter. Length from bottom of the head to where the taper begins is approximately .350 inch and length from bottom of the head to where the taper ends at the thread is about .590 inch. Sold as a set of 10.
NHRA Approved. Extra long wheel studs are used in competition applications where open end lug nuts are used to show full lug engagement. They are also used in applications where thicker/wider wheels or the use of wheel spacers requires a longer than stock wheel stud. These Grade 8 press-in wheel studs have a black oxide finish. 1/2-20 thread and 2-7/8 inch long with an approximately .660 inch knurl diameter. Length from bottom of the head to where the taper begins is approximately .350 inch and length from bottom of the head to where the taper ends at the thread is about .590 inch. Sold as a set of 10.
- Set of 10 Wheel Studs
- Stud Knurl Diameter .660" (Drill Hole .641")
- 1/2"-20 Thread x 2-7/8" Long
- Grade-8 Steel w/ Black Oxide Finish
- Extra Long for Competition Use
Information:
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations| Attributes | |
| ASIN | B000BWAP9I |
| Brand | Mr. Gasket |
| California Proposition 65 | No |
| Category | Tire and Wheel |
| Country of Origin (Primary) | US |
| Emission Code | 5 |
| Finish | Black Oxide |
| GTIN | 00084041043110 |
| Harmonized Tariff Code (Schedule B) | 8708706060 |
| Hazardous Material Code | N |
| Item Weight | 1.900 lbs. |
| Length | 2-7/8 |
| Length (IN) | 2-7/8 |
| Life Cycle Status Code | Available to Order |
| Material | Steel |
| NAFTA Preference Criterion Code | B |
| Position | N/A |
| Product Type | Lug Nuts, Wheel Studs |
| Quantity | 10 |
| Quantity Per Pkg. | 10 |
| SDR Required Flag | N |
| Sub Category | Hardware, Fasteners and Fittings |
| Thread Size | 1/2-20 |
| Warning | California Proposition 65 |
| Warranty | Limited 90 Day |
| Weight | 1.9, 1.9000 |
| part type | Wheel Lug Stud |
Mr. Gasket 4311 STUD,WHEEL-COMP 1/2RH 10/SET
Product Information
- Brand: Mr. Gasket
- Product Number: 4311