2-Channel Fixed Line Level Converter;
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator. The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers. This device will detect the presence of an audio signal and then generate a +12V output that can be used to turn-on an aftermarket amplifier. The LOC is able to handle 150 watts per channel continuous input without over heating. The input circuitry is designed to correct the crossover distortion commonly found on standard LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely adjustable using the onboard, high quality potentiometers. The remote output or amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote output will trigger instantaneously when the LOC detects a DC voltage on the white, left + audio input wire above 5V or a very low audio signal. It will shut off 60 seconds after no signal is detected. The LOC should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 150 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers.
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator. The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers. This device will detect the presence of an audio signal and then generate a +12V output that can be used to turn-on an aftermarket amplifier. The LOC is able to handle 150 watts per channel continuous input without over heating. The input circuitry is designed to correct the crossover distortion commonly found on standard LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely adjustable using the onboard, high quality potentiometers. The remote output or amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote output will trigger instantaneously when the LOC detects a DC voltage on the white, left + audio input wire above 5V or a very low audio signal. It will shut off 60 seconds after no signal is detected. The LOC should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 150 watts per channel. These wires can be found behind the stereo in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM speakers.
- Worlds Smallest L.O.C.
- 4 Channel Input
- Adjustable Gain For Each Channel
- 150 Watt Max Per Channel
- 12 Volt Signal Sense Turn On
- 6-1 Step Down With Variable Output
- Input Circuit Corrects Distortion Found On Other Brands Of Locs
- The Loc Will Shut Off 60 Seconds After No Signal Detected
Attributes | |
California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Country of Origin (Primary) | CN |
Emission Code | Legal US |
GTIN | 00086429213559 |
Harmonized Tariff Code (Schedule B) | 8543709960 |
Hazardous Material Code | N |
Life Cycle Status Code | Available to Order |
NAFTA Preference Criterion Code | B |
SDR Required Flag | N |
Metra Electronics AX-ALOC10 2-Channel Fixed Line Level Converter
Product Information
- Brand: Metra Electronics
- Product Number: AX-ALOC10