ICON 2.5” suspension systems lift your Ford Super Duty while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON rear shocks.
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON rear shocks.
- ICON engineered dual rate coil springs with match tuned performance shocks
- Less body-roll than stock
- Lifetime guarantee that coil springs won’t sag
- No drive shaft modifications required
- Corrosion resistant anodized aluminum shock bodies with 7/8" shafts (2.5 Aluminum Series shocks)
- 100% Bolt-on system -no cutting or welding necessary for install
- Remote reservoir with easy to adjust compression tune-ability
- Application Specific Alignment Cams ensure proper Caster alignment
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Adjustable trackbar for optimum front axle centering and minimizing deflection
- Dual steering stabilizer kit for smooth wheel control while driving
Information:
APPLICATION NOTE #94: WIDE STEER EQUIPPED TRUCKS REQUIRE STABILIZER PART NUMBER 66515 QTY 2Application Summary:
| Year | Make/Model |
|---|---|
| 2005-2016 | Ford F-250 Super Duty |
| 2005-2016 | Ford F-350 Super Duty |
This item is a package with the following components:
| Attributes | |
| AAP_UDA_12 | EA |
| AAP_UDA_22 | 1 |
| AAP_UDA_4 | 55 |
| Add-On Part | 191014 - .25" COLLAR SPANNER PIN WRENCH, 64039 - 08-UP FSD TRACK BAR BUMP STEER BRACKET KIT |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Dual Rate Coil Springs | Yes, Yes |
| GTIN | 00840103418001 |
| Harmonized Tariff Code (Schedule B) | 8708807000 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | C |
| OEM Wheels & Tires Fitment | Yes, Yes |
| Recommended Aftermarket Tires | 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.), 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) |
| Recommended Aftermarket Wheels | ICON Alloys |
| SDR Required Flag | N |