This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
- Increased wheel travel and ride quality over stock
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series rear IFP shocks with 5/8" shafts
- Included rear coil conversion kit eliminates factory air system
- Bolt-on system means no cutting or welding necessary for install
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers provide 0-3.5" of lift height
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Billet rear lower links offer increased strength, improved geometry, and on-vehicle pinion angle adjustment
Information:
APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLEApplication Summary:
| Year | Make/Model |
|---|---|
| 2003-2009 | Lexus GX470 |
This item is a package with the following components:
ICON Vehicle Dynamics 52700 Rear 2 Spring ..
Brand: ICON Vehicle Dynamics
Part Number: 52700
These ICON linear-rate coil springs provide two inches of lift and improves your on- and off-road ri..
Call for Pricing
ICON Vehicle Dynamics 54000 GX Billet Lowe..
Brand: ICON Vehicle Dynamics
Part Number: 54000
ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built ..
Call for Pricing
ICON Vehicle Dynamics 56110 Rear Coil Conv..
Brand: ICON Vehicle Dynamics
Part Number: 56110
The height of the kit’s bump stop spacers has been optimized for use with ICON rear shocks to maximi..
Call for Pricing
ICON Vehicle Dynamics 56505 Rear Shock Abs..
Brand: ICON Vehicle Dynamics
Part Number: 56505
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and wee..
Call for Pricing
ICON Vehicle Dynamics 58645 Coilover Kit
Brand: ICON Vehicle Dynamics
Part Number: 58645
Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial ra..
Call for Pricing
ICON Vehicle Dynamics 58551DJ Billet Upper..
Brand: ICON Vehicle Dynamics
Part Number: 58551DJ
ICON billet UCAs are made from CNC machined 6061 aluminum and feature PTFE-lined rod ends and ICON’s..
Call for Pricing
| Attributes | |
| AAP_UDA_12 | EA |
| AAP_UDA_22 | 1 |
| AAP_UDA_4 | 55 |
| Add-On Part | 198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| GTIN | 00840103417684 |
| Harmonized Tariff Code (Schedule B) | 8708807000 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | C |
| OEM Wheels & Tires Fitment | Yes, Yes |
| Recommended Aftermarket Tires | 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.), 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.) |
| Recommended Aftermarket Wheels | ICON Alloys |
| SDR Required Flag | N |