ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
ICON's Vehicle Specific (V.S.) 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.
- Adjustable coilovers yield 1.5-3.5” of front lift height over stock
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered Eibach coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" shaft
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
Information:
Recommended Aftermarket Tires (Silverado): 35"x12.50" (Minor fender trimming and modifications may be required)
Application Summary:
| Year |
Make/Model |
| 2019-2023 |
Chevrolet Silverado 1500 |
| 2022 |
Chevrolet Silverado 1500 LTD |
| 2019-2023 |
GMC Sierra 1500 |
| 2022 |
GMC Sierra 1500 Limited |
This item is a component of the following packages: K73062, K73062T
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT |
| Adjustable Damping |
NO, NO |
| Adjustable Height |
Yes |
| Adjustable Rebound |
No |
| Assembled |
Yes |
| Body Diameter |
2.5, 2.5 |
| Boot Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Over Springs Included |
Yes, Yes |
| Compressed Length |
17.97 |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Silver |
| Cylinder Finish |
Cadmium Plated |
| Cylinder Material |
Steel |
| Damping Type |
Oil, Oil |
| Dust Shield |
No, No |
| Dust Shield Included |
No |
| Extended Length |
23.83 |
| GTIN |
00840103406022 |
| Gas Charged |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Internal Construction Type |
Single Tube |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
BAR PIN, BAR PIN |
| Material |
Aluminum, Steel |
| Maximum Lift |
3.5 |
| Minimum Lift |
1.5 |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes, Yes |
| Recommended Aftermarket Tires |
(Sierra) 305/70R17 (Larger tires may fit but fender trimming and modifications will be required), (Silverado) 315/70R17 (Larger tires may fit but fender trimming and modifications will be required) |
| Recommended Aftermarket Wheels |
ICON Alloys |
| Remote Reservoir |
NO, NO |
| Reservoir Style |
Internal |
| SDR Required Flag |
N |
| Self-Leveling |
No |
| Service Parts |
252010 - 2.5 IFP REBUILD KIT, 257339 - 7/8 SHAFT 13.25 OAL, 9.00 TRAVEL |
| Shaft Diameter |
0.875, 0.875 |
| Shock Absorber Body End Measuring Point |
Top of Upper Mount Plate, Top of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point |
Flat on Bar Pin, Flat on Bar Pin |
| Spring Color |
Black, Black |
| Spring Material |
Steel, Steel |
| Spring Rate Type |
Linear |
| Travel Length |
5.87 |
| Upper Mount Type |
Mounting Plate, Mounting Plate |
| Valving Type |
Digressive |
| Warranty Time |
1 |
