ICON 2.5 Series front coilover shocks are an incredible upgrade for the 4th gen Toyota Tacoma. These adjustable coilovers allow up 1.25-3” of lift with vehicle-specific shock length and valving for superior ride quality and performance.
ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2024-2025 Toyota Tacoma. These adjustable coilovers allow up 1.25-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components, and their pairing with an ICON front differential drop (4WD only), yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. When paired with ICON 2.5 Aluminum Series CDEV rear shock absorbers, vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tacoma.
  • Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
  • 6061 Aircraft grade aluminum CNC machined components
  • Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
  • FK rod end bearings for extended longevity and minimal deflection
  • Fully rebuildable and re-tunable
  • Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
  • Height-adjustable coilovers offer 1.25-3" of lift height adjustment over stock
  • 2.5" diameter shock bodies with remote reservoirs
  • Remote reservoirs maintain cooler operating temperatures during extended off-road use
  • ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
  • ICON engineered coil springs

Information:

APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.

Application Summary:

Year Make/Model
2024-2025 Toyota Tacoma
Attributes
AAP_UDA_12 EA
AAP_UDA_22 1
AAP_UDA_4 55
Add-On Part 57808EP - 24 TACOMA 0-1" REAR 2.5 VS RR CDEV PAIR, 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
Adjustable Dampening Yes
Adjustable Damping Yes
Adjustable Height Yes
Adjustable Rebound No
Body Diameter 2.5
Boot Included No
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Coil Over Springs Included Yes, Yes
Country of Origin (Primary) US
Cylinder Color Silver
Cylinder Finish Cadmium Plated
Cylinder Material Steel
Damping Adjustment Type Electronic, Electronic
Damping Type Oil, Oil
Dust Shield No
Dust Shield Included No
GTIN 00840103428918
Gas Charged Yes
Grade Type Performance
Harmonized Tariff Code (Schedule B) 8708807000
Hazardous Material Code N
Internal Construction Type Single Tube
Life Cycle Status Code Available to Order
Lower Mount Type Eyelet
Material Aluminum, Steel
Maximum Lift 3, 3
Minimum Lift 1.25, 1.25
NAFTA Preference Criterion Code C
OEM Wheels & Tires Fitment Yes, Yes
Recommended Aftermarket Tires 33" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required), 33" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
Recommended Aftermarket Wheels ICON Alloys - 18x9 with 6.00” Backspace / 25mm Offset, ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset
Remote Reservoir Yes
Reservoir Style Remote
SDR Required Flag N
Shaft Diameter 0.875, 0.875
Shock Absorber Body End Measuring Point Top of Upper Mount Plate
Shock Absorber Rod End Measuring Point Center of Eyelet
Spring Color Black, Black
Spring Material Steel, Steel
Spring Rate Type Linear, Linear
Upper Mount Type Mounting Plate

Write a review.

Note: HTML is not translated.
    Bad           Good

ICON Vehicle Dynamics 58780E 24-25 TACOMA 2.5 VS RR CDEV COILOVER KIT

Product Information

Call for Pricing

Vehicle Fitment