Fits 2018-2023 Mustang GT 5.0L with Factory Active Performance Exhaust Valves. - Aggressive sound
This Flowmaster® Outlaw Axle-back exhaust system is specifically designed for the 2018-2023 Ford Mustang GT with the 5.0L engine and Factory Active Performance Exhaust Option. System features include a pair of our race-proven Outlaw® Series mufflers for a very aggressive exterior sound level with a noticeable interior tone and large 3.00-inch mandrel-bent 409S stainless steel tubing for high flow, durability, and longevity. Add to that, a pair of our high-quality valves to accommodate the factory exhaust actuators for when you really want to open up the sound. The system is finished off with quad 4.00-inch black ceramic coated 304 stainless steel tips for an aggressive look that demands attention, the same as the exhaust note from the Outlaw Series mufflers. Includes all necessary parts, hardware and detailed instructions for an easy installation you can do at home. Covered by our Lifetime Limited Warranty. Note: Fits both coupes and convertibles.
- Quad 4.00-inch Black Ceramic Coated 304 Stainless Steel Tips
- For Vehicles With Active Performance Exhaust Option
- Aggressive Race-proven Outlaw Mufflers
- Dyno-tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Full Stainless Steel Construction
- Straight-through Muffler Design
- Lifetime Limited Warranty
- Easy Installation
Information:
Fits 2018-2023 Mustang GT 5.0L Coupes & Convertibles with Factory Active Performance Exhaust Valves.
Application Summary:
| Year |
Make/Model |
| 2018-2023 |
Ford Mustang |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Outlaw |
| Exhaust Type |
Axle-Back |
| Exit Position |
Dual Rear, Dual Out Rear |
| GTIN |
00700042038206 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Inlet Inside Diameter |
3.000 in. |
| Life Cycle Status Code |
Available to Order |
| Material |
409S Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers |
| Muffler Body Length (in) |
5.5 |
| Muffler Color |
Black |
| Muffler Finish |
Painted |
| Muffler Inlet Diameter |
3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Location |
Centered, Center |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Location |
Centered, Center |
| Muffler Overall Length |
49.50 |
| Muffler Overall Length (in) |
49.5 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw |
| Muffler Shape |
Round |
| Muffler Type |
Reflection |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Axle-Back Exhaust Kit, Exhaust System |
| SDR Required Flag |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Cut |
Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Edge Style |
Cut |
| Tip Finish |
Black Ceramic, Black Ceramic Coating |
| Tip Length |
5.25 |
| Tip Length (in) |
5.25 |
| Tip Logo |
Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
4 |
| Tip Shape |
Round |
| Tip Style |
Double Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| part type |
Exhaust System Kit |
