Fits 2018-2023 Mustang GT 5.0L Coupes & Convertibles without Factory Active Performance Exhaust Valves. - Aggressive sound
The Flowmaster® Outlaw axle-back exhaust system is specifically designed for the 2018-2023 Ford Mustang GT coupe and convertible with the 5.0L engine. This bolt-on system is constructed of 3.00-inch mandrel-bent 409S stainless steel tubing flowing into a pair of our race-proven Outlaw® mufflers for an aggressive exterior sound with a noticeable interior sound level. The 3.00-inch tailpipes exit through the factory cutouts in the rear valance and are finished off with quad 4.00-inch polished stainless steel tips giving your Pony an aggressive look that matches the sound. This axle-back system retains the factory resonator mid-pipe. Check out our optional Scavenger® Series No Resonator X-Pipe #817817 for even more sound and power. This Outlaw system is designed for vehicles without active exhaust valves and uses the factory hanger locations for any easy installation you can do at home in about an hour. Includes easy to follow instructions and all necessary hardware needed. Note: Requires cutting the factory mufflers from the mid-pipe for installation.
- Large 4.00-inch Polished 304 Stainless Steel Tips
- Aggressive Race Proven Outlaw Mufflers
- Dyno-tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Full Stainless Steel Construction
- Lifetime Limited Warranty
- Easy Installation
Information:
Fits 2018-2023 Mustang GT 5.0L Coupes & Convertibles without Factory Active Performance Exhaust Valves.
Application Summary:
| Year |
Make/Model |
| 2018-2023 |
Ford Mustang |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Outlaw |
| Exhaust Type |
Axle-Back |
| Exit Position |
Dual Rear, Dual Out Rear |
| GTIN |
00700042038152 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Inlet Inside Diameter |
3.000 in. |
| Life Cycle Status Code |
Available to Order |
| Material |
409S Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers |
| Muffler Body Length |
6.500 in. |
| Muffler Body Length (in) |
6.5 |
| Muffler Color |
Black |
| Muffler Finish |
Painted |
| Muffler Inlet Diameter |
3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Location |
Centered, Center |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Location |
Centered, Center |
| Muffler Overall Length |
49.50 |
| Muffler Overall Length (in) |
49.5 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw |
| Muffler Shape |
Round |
| Muffler Type |
Reflection |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Axle-Back Exhaust Kit, Exhaust System |
| SDR Required Flag |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Cut |
Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
5.25 |
| Tip Length (in) |
5.25 |
| Tip Logo |
Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
4 |
| Tip Shape |
Round |
| Tip Style |
Double Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| part type |
Exhaust System Kit |
