Fits 2018-2025 Jeep Wrangler JL Unlimited 4-door models with 3.6L engine. High Clearance. - Aggressive to moderate sound
This Flowmaster® Outlaw® Cat-back exhaust system replaces the factory transverse muffler on 2018-2025 Jeep Wrangler Unlimited 4-door models with the 3.6L engine, including the Sahara 3.6L with Hybrid E-torque option. The system relocates the muffler into a position right behind the catalytic converter where it is tucked up into the frame and out of harm's way when navigating rocky terrain. The system is constructed from 409S stainless steel, features a race-proven Outlaw series muffler for an aggressive exterior with a moderate interior sound level in the cab and the single 2.50-inch mandrel-bent stainless steel tailpipe is re-routed to run up and over the rear sway bar and exits up high at the rear bumper to provide maximum clearance for extreme crawling. The system is finished off with a polished 3.00-inch stainless steel tip. Note: Does Not fit 2-door models.
- Race-proven Outlaw Performance Muffler
- Includes Hardware
- Easy Installation
- Provides Maximum Off-Road Clearance
- Uses the Factory Hanger Locations
- 2.50-inch Mandrel-bent Tubing
- Dyno Tuned For Maximum HP
- Stainless Steel Construction
- Lifetime Limited Warranty
- Flowmaster Quality
Information:
2018-2025 Jeep Wrangler JL Unlimited 4-door models with 3.6L engine, including the Sahara 3.6L with Hybrid E-torque option.
Application Summary:
| Year |
Make/Model |
| 2018-2025 |
Jeep Wrangler |
| Attributes |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Dyno Tuned For Maximum Performance |
| Bullet Point #2 |
Provides Maximum Off Roading Clearance |
| Bullet Point #3 |
Stainless Steel Construction |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No, No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clearance Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Discount Percentage |
26-50% |
| Emission Code |
5, 5 |
| Exhaust Series |
Outlaw, Outlaw |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
4.75 |
| Exhaust Type |
Cat-Back |
| Exit Position |
Side Out Rear, Single Rear Exit |
| GTIN |
00700042038220 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield Included |
No, No |
| Inlet Inside Diameter |
2.500 in. |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Muffler Body Diameter |
4.50 |
| Muffler Body Height |
4.50 |
| Muffler Body Length |
11.000 in. |
| Muffler Body Length (in) |
11 |
| Muffler Body Material |
409S Stainless Steel |
| Muffler Body Shape |
Round |
| Muffler Body Width |
4.50 |
| Muffler Color |
Black, Black |
| Muffler Count |
1 |
| Muffler Finish |
Painted |
| Muffler Inlet Diameter |
2.500 in., 2.50 |
| Muffler Inlet Diameter (in) |
2.5 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Location |
Center, Centered |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.500 in., 2.50 |
| Muffler Outlet Diameter (in) |
2.5 |
| Muffler Outlet Location |
Center, Centered |
| Muffler Overall Length |
18.500 in., 18.50 |
| Muffler Overall Length (in) |
18.5 |
| Muffler Overall Length (in.) |
18.500 in. |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Outlaw, Outlaw |
| Muffler Shape |
Round, Round |
| Muffler Type |
Reflection |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Cut |
Angle, Angle |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Edge Style |
Cut, Cut |
| Tip Finish |
Polished, Polished |
| Tip Length |
4.750 in., 4.75 |
| Tip Length (in) |
4.75 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
1, 1 |
| Tip Shape |
Round |
| Tip Style |
Single wall |
| Tip Type |
Single Wall |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Warning |
California Proposition 65, California Proposition 65 |
| part type |
Exhaust System Kit, Exhaust System Kit |
