2017-2023 Dodge Charger R/T, Daytona models with the 5.7L Hemi engine and integrated rear exhaust bezels - Aggressive to moderate sound
This Flowmaster American Thunder® cat-back exhaust system for the 2017-2023 Dodge Charger R/T and Daytona models with 5.7L Hemi engine is perfect for the person looking for an aggressive exterior sound level with all of the performance benefits that you would expect from Flowmaster®. This bolt-on 409S stainless steel system features a dual 3.00-inch mandrel-bent Scavenger Series® X-Pipe for maximum performance flowing into a pair of specially designed Super 40® Series mufflers with 3.50-inch internals for maximum power and exterior sound quality, but with a moderate but pleasant interior tone at cruising speeds. Other features include dual 3.00-inch mandrel-bent tailpipes which are designed to re-use the factory exhaust valves and exit in the factory exhaust tips located in the rear valance. The tailpipes are a two-piece design and have no resonators. This system includes all necessary parts, hardware, and instructions for an easy installation.
- Specially Designed Larger Muffler Internals for Powerful Deep Sound
- Designed to Re-use the Factory Exhaust Valves
- Uses the Factory Hanger Locations
- Scavenger X-Pipe Cross-over Pipe
- Stainless Steel Construction
- Lifetime Limited Warranty
Information:
This kit only fits vehicles with integrated rear exhaust bezels; it does not fit vehicles with traditional bumper/tip cutouts. Does NOT fit the Pursuit model.
Application Summary:
| Year |
Make/Model |
| 2017-2023 |
Dodge Charger |
| Attributes |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Specially Designed Large Muffler Internals for Powerful Deep Sound |
| Bullet Point #2 |
Designed to Re-use the Factory Exhaust Valves |
| Bullet Point #3 |
Scavenger X-Pipe Cross-over Pipe |
| Bullet Point #4 |
Stainless Steel Construction |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No, No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Type |
Cat-Back |
| Exit Position |
Dual Out Rear, Dual Out Rear |
| GTIN |
00700042036370 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses factory hangers, Uses Factory Hangers |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
13.25 |
| Muffler (Left) Body Width |
9.50, 9.50 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
13.25 |
| Muffler (Right) Body Width |
9.50 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
13.500 in. |
| Muffler Body Length (in) |
13.5 |
| Muffler Body Length (in.) |
13.500 |
| Muffler Body Material |
409S Stainless Steel |
| Muffler Body Shape |
Oval |
| Muffler Body Width |
9.50 |
| Muffler Color |
Black, Black |
| Muffler Count |
2 |
| Muffler Finish |
Painted |
| Muffler Inlet |
Offset, Offset |
| Muffler Inlet Diameter |
3.000 in., 3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Diameter (in.) |
3.000 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Location |
Offset |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet |
Centered, Centered |
| Muffler Outlet Diameter |
3.000 in., 3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Diameter (in.) |
3.000 |
| Muffler Outlet Location |
Center |
| Muffler Overall Length |
19.500 in., 19.50 |
| Muffler Overall Length (in) |
19.5 |
| Muffler Overall Length (in.) |
19.500 in. |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 40 Series, Super 40 Series |
| Muffler Shape |
Oval, Oval |
| Muffler Type |
Reflection |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat-back, Cat Back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
N/A |
| Tip Size |
N/A |
| Tip Style |
Not Included |
| Tip Type |
Not Included |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Warning |
California Proposition 65, California Proposition 65 |
| part type |
Exhaust System Kit, Exhaust System Kit |
