Fits 2017-2025 Ford F-250/F-350 Super Duty with 6.2L and 7.3L engines. - Moderate sound
Our Force II® line of exhaust systems are engineered as our quietest offerings, but will wake up your vehicles sound and power over the factory O.E. exhaust. You can generally expect a noticeable sound increase with a deep performance tone outside the vehicle, yet minimal interior drone in the cab area while cruising down the road enjoying all the performance benefits you've come to expect from Flowmaster®. This bolt-on emissions-legal cat-back system features full stainless steel construction, uses the factory hanger locations, 50 Series HD™ performance muffler with large 4.00-inch internals and dual 3.00-inch mandrel bent tailpipes offering two tailpipe exits in one kit. Choose your tailpipe exit either located under the rear bumper for an aggressive dual exhaust look, or exiting out the sides behind the rear tires to prevent blowing exhaust on your boat or trailer when towing. The system is finished off with a pair of large 4.00-inch polished logo embossed stainless steel tips for a modern look and includes instructions and all necessary hardware for an easy at home installation. Note: Fits 2/4 wheel drive and all wheelbases.
- Moderate Exterior Sound with Mild Interior Sound
- Retains Factory Resonators
- Lifetime Limited Warranty
- Flowmaster Quality
- Easy Installation
- Large 4.00-inch Polished 304 Stainless Steel Tips
- Dyno-Tuned for Maximum Performance
- Mandrel-bent Stainless Steel Tubing
- Uses the Factory Hanger Locations
- 409S Stainless Steel Construction
- 50 Series HD Performance Muffler
Information:
2017-2025 Ford F-250 Super Duty and F-350 Super Duty with 6.2L and 7.3L engines. Fits 2/4 wheel drive and all wheelbases. Does not fit models with the Tremor package.
Application Summary:
| Year |
Make/Model |
| 2017-2025 |
Ford F-250 Super Duty |
| 2017-2025 |
Ford F-350 Super Duty |
| Attributes |
| Brand |
Flowmaster |
| Bullet Point #1 |
Moderate Sound Level |
| Bullet Point #2 |
409S Stainless Steel Construction |
| Bullet Point #3 |
Dyno-Tuned for Maximum Performance |
| Bullet Point #4 |
Flowmaster Reliability |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Cat-Back |
| Exit Position |
Dual Out Side, Dual Out Rear / Dual Out Side |
| GTIN |
00700042038503 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Inside Diameter |
3.000 in. |
| Life Cycle Status Code |
Available to Order |
| Material |
409S Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers |
| Muffler Body Length |
18.000 in. |
| Muffler Body Length (in) |
18 |
| Muffler Body Material |
409S Stainless Steel |
| Muffler Body Shape |
Oval |
| Muffler Color |
Black |
| Muffler Count |
1 |
| Muffler Finish |
Painted |
| Muffler Inlet Diameter |
3.000 in., 3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Location |
Center, Centered |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
3.000 in., 3.00 |
| Muffler Outlet Diameter (in) |
3 |
| Muffler Outlet Location |
Dual Outlet, Dual |
| Muffler Overall Length |
24.000 in., 24.00 |
| Muffler Overall Length (in) |
24 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
50 Series HD |
| Muffler Shape |
Oval |
| Muffler Type |
Reflection |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Cut |
Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
13.000 in., 13.00 |
| Tip Length (in) |
13 |
| Tip Logo |
Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Warning |
California Proposition 65 |
| part type |
Exhaust System Kit |
