2014-2019 Corvette C7 Stingray Coupes/Convertibles with 6.2L engine. - Aggressive to moderate sound
The Flowmaster® Outlaw® Axle-back exhaust system is designed for 2014-2019 Corvette C7 Stingray Coupes and Convertibles with the 6.2L engine. This axle-back exhaust system features all stainless steel construction with 3.00-inch mandrel-bent tubing, specially designed high performance mufflers that maintain a pleasant tone inside the car while providing a deep moderate/aggressive performance tone outside the car letting others know you mean business. This system has provisions to retain the factory AFM valves for low throttle cruising. The system is finished off Quad 4.00-inch 304 stainless steel tips giving your C7 the performance look your car deserves and the sound everyone loves to hear. Notes: NOT Intended for vehicles equipped with Bi-Mode (NPP) Exhaust Option.
- Dyno Tuned For Maximum Performance
- Moderate/Aggressive Exhaust Note
- Accomadates Factory AFM Valves
- Stainless Steel Construction
- Lifetime Limited Warranty
- Mandrel-bent Tubing
Information:
2014-2019 Chevrolet Corvette C7 Stingray with 6.2L engine.
Application Summary:
| Year |
Make/Model |
| 2014-2019 |
Chevrolet Corvette |
| Attributes |
| ASIN |
B01N99N750 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Proven Flowmaster Technology |
| Bullet Point #4 |
Made in the USA |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No, No |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Pipe Material |
Stainless Steel |
| Exhaust Series |
Outlaw, Outlaw |
| Exhaust Type |
Dual |
| Exit Position |
Dual Out Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042035120 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3.000 in. |
| Main Piping Diameter (in.) |
3 |
| Material |
409 Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Muffler Body Material |
409S Stainless Steel |
| Muffler Body Shape |
Oval |
| Muffler Count |
2 |
| Muffler Finish |
Black |
| Muffler Inlet Diameter |
3.000 in., 3.00 |
| Muffler Inlet Diameter (in) |
3 |
| Muffler Inlet Diameter (in.) |
3.000 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.500 in., 2.50 |
| Muffler Outlet Diameter (in) |
2.5 |
| Muffler Outlet Diameter (in.) |
2.500 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Resonator, Resonator |
| Muffler Shape |
Oval, Oval |
| Muffler Type |
Welded Baffle |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Cut |
Angle, Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Edge Style |
Cut, Cut |
| Tip Finish |
Polished, Polished |
| Tip Length |
7.500 in., 7.50 |
| Tip Length (in) |
7.5 |
| Tip Length (in.) |
7.5 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
4, 4 |
| Tip Shape |
Round |
| Tip Size |
4.0 in. |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tube Diameter |
3 inch, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-Back |
| Type of Exhaust |
Axle Back, Axle Back |
| Warning |
California Proposition 65, California Proposition 65 |
| part type |
Exhaust System Kit, Exhaust System Kit |
