2016-2023 Camaro LS, LT with the 2.0L turbocharged engine. - Aggressive to moderate sound
This Flowmaster American Thunder® axle-back exhaust system is designed for 2016-2023 Camaro LS, LT coupes and convertible with the 2.0L turbocharged engine, and is perfect for the person looking for an aggressive to moderate sound level both inside and outside the car, with all of the performance benefits you would expect from Flowmaster®. This bolt-on emissions-legal system features a pair of our race-proven Outlaw® Series mufflers and dual mandrel-bent 2.50-inch tailpipes for maximum performance. The system is constructed from 409S stainless steel and is finished off with a pair of large 4.00-inch polished stainless steel tips. The system is covered by our Lifetime Limited Warranty and includes all necessary parts, hardware and instructions for a quick and easy installation you can do at home. Fits coupes and convertibles.
- Large 4.00-inch Polished Stainless Steel Tips
- Dyno-tuned For Maximum Performance
- Race-proven Outlaw Series Mufflers
- Stainless Steel Construction
- Lifetime Limited Warranty
- Full Mandrel-bent Tubing
- Deep Powerful Sound
Information:
"Fits coupes and convertibles.
Application Summary:
| Year |
Make/Model |
| 2016-2023 |
Chevrolet Camaro |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B01JTPYX5O |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Mandrel Bent Tubing |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No, No |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Length |
5.25 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Out Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042034628 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Inside Diameter |
OEM |
| Inlet Inside Diameter (in.) |
OEM |
| Inlet Size (in.) |
OEM |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
409 Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
6.50 |
| Muffler (Left) Body Width |
4.00 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
6.50 |
| Muffler (Right) Body Width |
4.00 |
| Muffler Body Diameter |
4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Material |
409S Stainless Steel |
| Muffler Body Shape |
Round |
| Muffler Body Width |
4.00 |
| Muffler Count |
2 |
| Muffler Finish |
Black |
| Muffler Inlet Diameter |
2.250 in., 2.25 |
| Muffler Inlet Diameter (in) |
2.25 |
| Muffler Inlet Diameter (in.) |
2.250 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.500 in., 2.50 |
| Muffler Outlet Diameter (in) |
2.50, 2.5 |
| Muffler Outlet Diameter (in.) |
2.500 |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw, Outlaw |
| Muffler Shape |
Round, Round |
| Muffler Type |
Welded Baffle |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
N/A |
| Outlet Outside Diameter (in.) |
N/A |
| Outlet Size (in.) |
N/A |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Cut |
Angle, Angle |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4.00, 4 |
| Tip Diameter (in.) |
4.00 |
| Tip Edge Style |
Cut, Cut |
| Tip Finish |
Polished, Polished |
| Tip Length |
5.250 in., 5.25 |
| Tip Length (in) |
5.25 |
| Tip Length (in.) |
5.25 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless Steel, 304 Stainless |
| Tip Quantity |
2, 2 |
| Tip Shape |
Round |
| Tip Size |
4.0 in. |
| Tip Style |
Double wall |
| Tip Type |
Double Wall |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.50, 2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-Back |
| Warning |
California Proposition 65, California Proposition 65 |
| part type |
Exhaust System Kit, Exhaust System Kit |
