1974-1979 Chevrolet Corvette 350ci engine. (Intended for Off Road Use Only on 1975-1979 Vehicles). - Moderate to mild sound
The Flowmaster Force II® Crossmember-back system for 1974-1979 Chevrolet Corvette is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster®. This stainless steel dual exhaust system features mandrel-bent 2.25-inch tubing flowing into a pair of specially tuned 60 Series™ Delta Flow® performance mufflers and our exclusive Scavenger Series® X-pipe assembly for maximum power and a deep unique tone. The tailpipes are finished off with a pair of highly polished 3.00-inch stainless steel angle cut tips for an aggressive look and the exhaust system is covered by our Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Intended for Off Road Use Only on 1975-1979 Models.
- Specially Tuned 60 Series Performance Mufflers
- Exclusive Scavenger Series X-pipe Cross-over
- Dyno Tuned For Maximum Performance
- All Stainless Steel Construction
- Lifetime Limited Warranty
- Delta Flow Technology
Information:
Fits 1974-1979 Chevrolet Corvette with 350 Cubic inch engine. (Intended for Off Road Use Only on 1975-1979 Vehicles).
Application Summary:
Year |
Make/Model |
1974-1979 |
Chevrolet Corvette |
Attributes |
2WD/4WD |
RWD, 2WD |
ASIN |
B00HNQK59U |
Brand |
Flowmaster |
Bullet Point #1 |
Stainless Steel Construction |
Bullet Point #2 |
Dyno Tuned For Maximum Performance |
Bullet Point #3 |
Patented Delta Flow Technology |
Bullet Point #4 |
Lifetime Limited Warranty |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Catalytic Converter Included |
No |
Catalytic Converter Quantity |
Not Included |
Category |
Exhaust |
Color |
Black |
Country of Origin (Primary) |
US |
Emission Code |
4, Off Road |
Exhaust Series |
Force II |
Exhaust Type |
Dual |
Exit Position |
Dual Rear, Dual Out Rear |
Exit Style |
Straight |
GTIN |
00700042030552 |
Harmonized Tariff Code (Schedule B) |
8708925000 |
Hazardous Material Code |
N |
Heat Shield |
No |
Heat Shield Attached |
No |
Inlet Diameter |
2.250 in., 2.25 |
Inlet Diameter (in) |
2.25 |
Inlet Inside Diameter |
2.250 in. |
Inlet Inside Diameter (in.) |
2.25 |
Inlet Size (in.) |
2.25 |
Life Cycle Status Code |
Available to Order |
Main Piping Diameter |
2-1/4 |
Material |
Stainless Steel, 409 Stainless Steel |
Mount Type |
Flanged |
Muffler Body Height |
4.00 |
Muffler Body Width |
9.50 |
Muffler Count |
2 |
Muffler Inlet Outside Diameter |
2.50 |
Muffler Part Number |
Kit Only |
Muffler Quantity |
2 |
Muffler Series |
60 Series Delta Flow |
Muffler Type |
Welded Baffle |
NAFTA Preference Criterion Code |
B |
Outlet Diameter |
2.500 in., 2.25 |
Outlet Diameter (in) |
2.25 |
Outlet Outside Diameter |
3.000 in. |
Outlet Outside Diameter (in.) |
3 |
Outlet Size (in.) |
3 |
Product Type |
Exhaust Systems / Kits, Exhaust System |
SDR Required Flag |
N |
SDS Sheet Number |
N |
Series |
Force II Exhaust Systems |
Shape |
Oval |
Single Dual |
Dual |
Single or Dual |
Dual |
Sound Level |
Mild/Moderate, Moderate/Mild |
Sub Category |
Exhaust and Tail Pipes |
Subcategory |
Complete Exhaust Kits |
System Type |
Crossmember Back, Crossmember-back |
Tail Pipe Diameter |
2.250 in. |
Tail Pipe Outlet Outside Diameter |
2.25 |
Tip Cut |
Angle |
Tip Diameter |
3.000 in., 3.00 |
Tip Diameter (in) |
3 |
Tip Diameter (in.) |
3 |
Tip Edge Style |
Cut |
Tip Finish |
Polished |
Tip Length |
4.750 in., 4.75 |
Tip Length (in) |
4.75 |
Tip Length (in.) |
4.75 |
Tip Logo |
Embossed |
Tip Material |
Stainless Steel, 409 Stainless Steel |
Tip Quantity |
2 |
Tip Shape |
Round |
Tip Size |
3 in. |
Tip Style |
Single wall |
Tip Type |
Single Wall |
Tubing Diameter |
2.250 in., 2.25 |
Tubing Diameter (IN) |
2.25 |
Type |
Crossmember-back |
Warning |
California Proposition 65 |
Warranty Time |
12 |
part type |
Exhaust System Kit |