Fits 2011-2018 Chevrolet Silverado 1500, GMC Sierra 1500 with 6.2L engine. - Aggressive to moderate sound
The American Thunder® Cat-back exhaust system for 2011-2018 Chevrolet Silverado and GMC Sierra 1500 trucks with the 6.2L engine, is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior tone. This bolt-on stainless steel system features a 3.50-inch mandrel-bent inlet pipe flowing into the 50 Series™ HD performance muffler with large 4.00-inch internals and a built-in tuned resonance chamber to minimize interior drone. The system has dual 2.50-inch mandrel-bent tailpipes which use the factory hanger locations and are finished off with large 3.50-inch polished stainless steel tips. This exhaust system gives you choices for tailpipe exit location either out each side behind the rear tires if you do a lot of towing, or straight-out under the rear bumper for a muscular look. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for easy installation you can do at home. Note: Fits 2/4 WD model with Crew Cab/Short Bed (143.5" WB), Crew Cab/Standard Bed (153" WB) and Double Cab/Standard Bed (143.5" WB).
  • Dyno Tuned For Maximum Performance
  • Uses the Factory Hanger Locations
  • 50 Series HD Performance Muffler
  • Your Choice of Two Tailpipe Exits
  • Clears the Factory Spare Tire
  • Stainless Steel Construction
  • Lifetime Limited Warranty

Information:

Fits 2011-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 with 6.2L engine, 2/4 WD model with Crew Cab/Short Bed (143.5" WB), Crew Cab/Standard Bed (153" WB) and Double Cab/Standard Bed (143.5" WB).

Application Summary:

Year Make/Model
2011-2018 Chevrolet Silverado 1500
2011-2018 GMC Sierra 1500
Attributes
ASIN B01N0IY6QH
Brand Flowmaster, Flowmaster
Bullet Point #1 Stainless Steel Construction
Bullet Point #2 Dyno Tuned For Maximum Performance
Bullet Point #3 Patented Delta Flow Technology
Bullet Point #4 Made in the USA
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Catalytic Converter Included No, No
Catalytic Converter Quantity Not Included
Category Exhaust, Exhaust
Country of Origin (Primary) US
Emission Code 5, 5
Exhaust Series American Thunder, American Thunder
Exhaust System Kit Type Cat-Back, Cat-Back
Exhaust Tip Length 13.00
Exhaust Type Dual
Exit Position Dual Rear Same Side, Dual Out Rear / Dual Out Side
Exit Style Straight
GTIN 00700042035038
Harmonized Tariff Code (Schedule B) 8708925000
Hazardous Material Code N
Heat Shield No, No
Heat Shield Attached No
Inlet Inside Diameter 3.500 in.
Inlet Inside Diameter (in.) 3.5
Inlet Size (in.) 3.5
Life Cycle Status Code Available to Order
Main Piping Diameter 2-1/2
Material 409 Stainless Steel, 409 Stainless Steel
Mount Type Uses Factory Hangers, Uses Factory Hangers
Muffler Body Height 5.00
Muffler Body Length 18.00
Muffler Body Material 409S Stainless Steel
Muffler Body Shape Oval
Muffler Body Width 10.00
Muffler Count 1
Muffler Finish Gray
Muffler Inlet Diameter 3.500 in., 3.50
Muffler Inlet Diameter (in) 3.5
Muffler Inlet Diameter (in.) 3.500
Muffler Inlet Inside Diameter 3.00
Muffler Inlet Outside Diameter 3.13
Muffler Material 409S Stainless Steel, 409 Stainless Steel
Muffler Outlet Diameter 2.500 in., 2.50
Muffler Outlet Diameter (in) 2.5
Muffler Outlet Diameter (in.) 2.500
Muffler Part Number Kit Only, Kit Only
Muffler Quantity 1
Muffler Series 50 Series HD, 50 Series HD
Muffler Shape Oval, Oval
Muffler Type Welded Baffle
NAFTA Preference Criterion Code B
Outlet Outside Diameter 2.500 in.
Outlet Outside Diameter (in.) 2.5
Outlet Size (in.) 2.5
Product Type Exhaust Systems / Kits, Exhaust System
SDR Required Flag N
SDS Sheet Number N
Sale Category Exhaust
Series American Thunder Exhaust Systems
Single Dual Dual, Dual
Single or Dual Dual
Sound Level Moderate, Aggressive / Moderate
Sub Category Exhaust and Tail Pipes, Exhaust and Tail Pipes
Subcategory Axle-Back Exhaust Kits
System Type Cat Back, Cat-back
Tail Pipe Diameter 2.500 in.
Tail Pipe Outlet Outside Diameter 2.50
Tip Cut Angle, Angle
Tip Diameter 3.500 in., 3.50
Tip Diameter (in) 3.5
Tip Diameter (in.) 3.5
Tip Edge Style Cut, Cut
Tip Finish Polished, Polished
Tip Length 13.000 in., 13.00
Tip Length (in) 13
Tip Length (in.) 13
Tip Logo Embossed, Embossed
Tip Material 304 Stainless Steel, 304 Stainless
Tip Quantity 2, 2
Tip Shape Round
Tip Size 3.5 in.
Tip Style Double wall
Tip Type Double Wall
Tubing Diameter 2.500 in., 2.50
Tubing Diameter (IN) 2.5
Tubing Material 409S Stainless Steel, 409 Stainless Steel
Warning California Proposition 65, California Proposition 65
part type Exhaust System Kit, Exhaust System Kit

Write a review.

Note: HTML is not translated.
    Bad           Good

Flowmaster 817602 11-18 GM 1500 CC-EC 6.2L AMT DOR

Product Information

Call for Pricing

Vehicle Fitment