2013-2014 Ford Mustang GT 5.0L Coupes & Convertibles. - Aggressive sound
Introducing the Flowmaster Outlaw® Cat-back exhaust system for the 2013-2014 Ford Mustang GT with 5.0L engine. This system is perfect for the person looking for a deep powerful exterior sound while maintaining a moderate interior sound level with all of the performance benefits that you would expect from Flowmaster®. New features include dual 3.00-inch mandrel-bent stainless steel tubing flowing into a Scavenger Series® X-pipe for maximum performance and a deep unique muscle tone. The Scavenger Series X-pipe then flows into a pair of race-proven Outlaw® mufflers and out into the dual 3.00-inch mandrel-bent tailpipes. The tailpipes use the factory hanger locations and are finished off with large 4.00-inch polished stainless steel tips to complement the factory cutouts. Designed for an easy installation this system includes all necessary parts, hardware, and detailed instructions. Note: Fits Coupes and Convertibles.
- Includes our Exclusive Scavenger Series X-pipe
- Very Aggressive Interior & Exterior Sound
- Uses the Factory Hanger Locations
- Dyno Tuned For Maximum Power
- Race-proven Outlaw Mufflers
- Stainless Steel Construction
- Lifetime Limited Warranty
Information:
Fits 2013-2014 Ford Mustang GT 5.0L Coupes & Convertibles.
Application Summary:
| Year |
Make/Model |
| 2013-2014 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B0094G190Q |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Angle Cut Turn Down |
| Bullet Point #3 |
Flowmaster's most Aggressive Sound system |
| Bullet Point #4 |
Premium Quality |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Outlaw, Outlaw |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
5.25 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042027583 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
10.50 |
| Muffler (Left) Body Width |
4.00 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
10.50 |
| Muffler (Right) Body Width |
4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Width |
4.00 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw, Outlaw |
| Muffler Type |
Straight-Through |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
4.000 in. |
| Outlet Outside Diameter (in.) |
4 |
| Outlet Size (in.) |
4 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive, Aggressive |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2, 2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System Kit |
