2007-2008 GM Silverado/Sierra 1500 4.8L, 5.3L engine flex fuel. All wheelbases except EC/LB. Also fits 2009-2013 GM Silverado/Sierra 1500 with 5.3L Extended Cab/6-ft bed and CC/5.5ft bed. - Mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. This Force II single exhaust system includes all stainless steel 3.00-inch mandrel-bent tubing flowing into a Super 50™ Series muffler, uses the factory hanger locations and has a large single tailpipe finished off with a 3.50-inch polished stainless steel tip. This Force II® system delivers a mild exterior and interior tone, and is suited to customers looking for efficiency improvements without a lot of noise. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation and are covered by our Lifetime Limited Warranty. Notes: Also fits 2009-2013 GM Silverado/Sierra 1500 with 5.3L Extended Cab/6-ft bed and CC/5.5ft bed.
- Includes Hangers and all Hardware for an Easy Installation
- Mandrel Bent 16 gauge Stainless Steel Tubing
- Connects After Factory Catalytic Converter
- Stock to Mild Exterior Exhaust Tone
- Lifetime Limited Warranty
- Minimal Interior Drone
Information:
Fits 2007-2008 GM Silverado/Sierra 1500 4.8L, 5.3L engine flex fuel, all wheelbases except EC/LB. Also fits 2009-2013 GM Silverado/Sierra 1500 with 5.3L EC/6ft bed and CC/5.5ft bed.
Application Summary:
Year |
Make/Model |
2007-2013 |
Chevrolet Silverado 1500 |
2007-2013 |
GMC Sierra 1500 |
Attributes |
2WD/4WD |
2WD, 4WD |
ASIN |
B005HTLT04 |
Brand |
Flowmaster |
Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
Bullet Point #2 |
Stock to mild exterior exhaust tone |
Bullet Point #3 |
Includes hangers and hardware for easy installation |
Bullet Point #4 |
Connects After Factory Catalytic Converter |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Catalytic Converter Quantity |
Not Included |
Category |
Exhaust |
Country of Origin (Primary) |
US |
Emission Code |
5 |
Exhaust Series |
Force II |
Exhaust System Kit Type |
Cat-Back |
Exhaust Type |
Single |
Exit Position |
Single Side, Single Side Exit |
Exit Style |
Straight |
GTIN |
00700042025121 |
Harmonized Tariff Code (Schedule B) |
8708925000 |
Hazardous Material Code |
N |
Heat Shield |
No |
Heat Shield Attached |
No |
Inlet Diameter |
3.000 in., 3.00 |
Inlet Diameter (in) |
3 |
Inlet Inside Diameter |
3.000 in. |
Inlet Inside Diameter (in.) |
3 |
Inlet Size (in.) |
3 |
Life Cycle Status Code |
Available to Order |
Material |
Stainless Steel, 409 Stainless Steel |
Muffler Count |
1 |
Muffler Part Number |
Kit Only |
Muffler Quantity |
1 |
Muffler Series |
Super 50 Series |
Muffler Type |
Chambered |
NAFTA Preference Criterion Code |
B |
Outlet Diameter |
3.000 in., 3.00 |
Outlet Diameter (in) |
3 |
Outlet Outside Diameter |
3.000 in. |
Outlet Outside Diameter (in.) |
3 |
Outlet Size (in.) |
3 |
Product Type |
Exhaust Systems / Kits, Exhaust System |
SDR Required Flag |
N |
SDS Sheet Number |
N |
Series |
Force II Exhaust Systems |
Single Dual |
Single |
Single or Dual |
Single |
Sound Level |
Mild |
Sub Category |
Exhaust and Tail Pipes |
Subcategory |
Cat-Back Exhaust Kits |
System Type |
Cat Back, Cat-back |
Tail Pipe Diameter |
3.000 in. |
Tip Diameter |
3.500 in., 3.50 |
Tip Diameter (in) |
3.5 |
Tip Diameter (in.) |
3.5 |
Tip Quantity |
1 |
Tip Size |
3.5 in. |
Tubing Diameter |
3.000 in., 3.00 |
Tubing Diameter (IN) |
3 |
Warning |
California Proposition 65 |
Warranty Time |
12 |
part type |
Exhaust System Kit |