2011-2012 Ford Mustang GT 5.0L Coupes & Convertibles. Also fits 2012 Ford Mustang Boss 302. - Aggressive sound
This Outlaw® axle-back exhaust system is specifically designed for 2011-2012 Ford Mustang GT with the 5.0L engine and replaces the original rear mounted mufflers with factory style connections. With easy fit in mind, these 3.00-inch mandrel-bent exhaust systems include a pair of our race-proven Outlaw mufflers for an aggressive exterior and interior sound, and with the maximum amount of power gain possible from an axle-back system. The hangers use the factory locations and the system is finished off with a pair of 4.00-inch polished stainless steel tips embossed with the Flowmaster® name. Designed for an quick and easy installation, these systems include all necessary parts, hardware, detailed instructions and are covered by our Lifetime Limited Warranty. Notes: Also fits 2012 Ford Mustang Boss 302 models.
- Includes Hangers and Hardware for an Easy Installation
- 3.00-inch Mandrel-bent Stainless Steel Tubing
- Large 4.00-inch Polished Stainless Steel Tips
- Dyno Tuned for Maximum Performance
- Aggressive Exterior Exhaust Note
- Lifetime Limited Warranty
Information:
Fits 2011-2012 Ford Mustang GT 5.0L Coupes & Convertibles. Also fits 2012 Ford Mustang Boss 302.
Application Summary:
| Year |
Make/Model |
| 2011-2012 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD, 2WD |
| ASIN |
B005J6SMQE |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Axle-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Outlaw, Outlaw |
| Exhaust Tip Length |
5.25 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042025176 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.750 in., 2.75 |
| Inlet Diameter (in) |
2.75 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
10.50 |
| Muffler (Left) Body Width |
4.00 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
10.50 |
| Muffler (Right) Body Width |
4.00 |
| Muffler Body Diameter |
4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Width |
4.00 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw Delta Force, Outlaw |
| Muffler Type |
Straight-Through |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive, Aggressive |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2, 2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Axle-Back, Axle-Back |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System Kit |
