2007-2018 Jeep Wrangler JK with 3.6L or 3.8L engine, fits both 2 door and 4 door models. - Mild sound
This Flowmaster® Force II® Cat-back exhaust system fits 2007-2018 Jeep Wrangler JK 2-door and 4-door models with the 3.8L or 3.6L engines. This emissions legal system is constructed from 2.50-inch mandrel-bent stainless steel flowing into a Super 50 Series™ muffler, which incorporates an internal resonance chamber keeping interior drone down to a minimum while providing a deep mild exterior sound level. The mandrel-bent tailpipe exits in the stock location and is finished off with a 3.00-inch brushed 304 stainless steel tip at the rear bumper. The system uses the factory hanger locations for easy installation and includes all necessary parts, hardware, installation instructions and is covered by our Lifetime Limited Warranty.
- Super 50 Series Muffler with Built-in Resonance Chamber
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 gauge Stainless Steel Tubing
- Connects After Factory Catalytic Converter
- Stock to Mild Exterior Exhaust Tone
- Uses the Factory Hanger Locations
- Lifetime Limited Warranty
Information:
"Fits 2007-2018 Jeep Wrangler JK with 3.6L or 3.8L engine, fits both 2 door and 4 door models.
Application Summary:
| Year |
Make/Model |
| 2007-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| 2WD/4WD |
4WD |
| ASIN |
B005WQ7BX6 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Stock to mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Connects After Factory Catalytic Converter |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Single |
| Exit Position |
Single Rear, Single Rear Exit |
| Exit Style |
Straight |
| GTIN |
00700042025046 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
1 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
1 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
