2005-2008 Corvette 6.0L, 6.2L engines. Does Not fit ZR1 - Moderate to mild sound
Flowmaster® proudly introduces our Force II® exhaust system for 2005-2008 C6 Corvettes (except ZR1) with the 6.0L or 6.2L engines. The system is engineered as a bolt-on axle-back exhaust system and features specially-engineered 60 Series™ performance mufflers which clamp directly to the car's OE exhaust tubing using fully mandrel-bent 2.50-inch stainless steel tubing. The mufflers tuck up high and are finished off with highly polished 4.00-inch quad tips. The 60 Series have a moderate deep exterior sound with a mild tone inside while providing the performance gains you've come to expect from Flowmaster. Includes detailed installation instructions along with all necessary parts, hardware and instructions for an easy at home installation. As with all Flowmaster stainless exhaust systems, our Limited Lifetime Warranty provides you assurance of our commitment to quality.
- Includes Hangers and Hardware for an Easy Installation
- Specially Designed 60 Series Performance Mufflers
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Quad 4.00-inch Polished Stainless Steel Tips
- Dyno Tuned for Maximum Performance
- Moderate Deep Exterior Exhaust Tone
- Uses the Factory Hanger Locations
- Lifetime Limited Warranty
Information:
2005-2008 Corvette 6.0L, 6.2L engines. Does Not fit ZR1.
Application Summary:
| Year |
Make/Model |
| 2005-2008 |
Chevrolet Corvette |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B0069IDTZA |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Mild to Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Axle-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042025190 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler (Left) Body Height |
5.00 |
| Muffler (Left) Body Length |
13.00 |
| Muffler (Left) Body Width |
12.00 |
| Muffler (Right) Body Height |
5.00 |
| Muffler (Right) Body Length |
13.00 |
| Muffler (Right) Body Width |
12.00 |
| Muffler Body Height |
5.00 |
| Muffler Body Width |
12.00 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
60 Series Delta Flow |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild/Moderate, Moderate/Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
4 |
| Tip Size |
3 in. |
| Tube Diameter |
2.5 inch, 2.50 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Type |
Axle-Back |
| Type of Exhaust |
Axle Back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
