2005-2009 Ford Mustang with V6 engine. - Mild sound
This Flowmaster® Force II® system features true dual 2.25-inch mandrel-bent stainless steel tubing flowing into our exclusive Scavenger Series® X-pipe for maximum power and a deep unique tone. The tubing then flows into a specially designed pair of 60 Series™ performance mufflers and delivers a moderate exterior tone, with a mild interior tone. The mufflers are finished off with a large pair of 3.00-inch polished stainless steel tips and the system comes with a template to trim the lower valance for that true dual exhaust look and sound. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation and is covered by our Lifetime Limited Warranty. Note: Requires a cut-out to be made in the rear bumper valance to accommodate the left side exhaust tip (template included).
- Includes Hangers and Hardware for an Easy Installation
- Specially Designed 60 Series Performance Mufflers
- Connects After the Factory Catalytic Converters
- Includes our Exclusive Scavenger Series X-pipe
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Mild to Moderate Exterior Exhaust Tone
- Uses the Factory Hanger Locations
- True Dual Exhaust System
Information:
Fits 2005-2009 Ford Mustang with V6 engine. Requires a cut-out to be made in the rear bumper valance to accommodate the left side exhaust tip (template included).
Application Summary:
| Year |
Make/Model |
| 2005-2009 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD, 2WD |
| ASIN |
B005HTLSOQ |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Mild to Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Connects After Factory Catalytic Converter |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042025053 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
2.250 in. |
| Inlet Inside Diameter (in.) |
2.25 |
| Inlet Size (in.) |
2.25 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/4 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
60 Series Delta Flow, 60 Series Delta Flow |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.25 |
| Outlet Diameter (in) |
2.25 |
| Outlet Outside Diameter |
2.250 in. |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Size (in.) |
2.25 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild, Mild |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.250 in. |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
2, 2 |
| Tip Size |
3.5 in. |
| Tubing Diameter |
2.250 in., 2.25 |
| Tubing Diameter (IN) |
2.25 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
