Fits 2007*-2013 GM (*not classic body) Silverado/Sierra 1500 with the 5.3L engines. - Moderate sound
The Flowmaster® Force II® cat-back exhaust system for 2007*-2013 GM (*not classic body) Silverado/Sierra 1500 with the 5.3L engine. This bolt-on emissions-legal system features 3.00-inch mandrel-bent stainless steel tubing flowing into a Super 50™ Series muffler with a mild interior tone and a deep moderate sound level outside the cab. The dual 2.50-inch mandrel-bent stainless steel tailpipes use the factory hanger locations and can be configured with your choice of exit locations, either straight out the back under the bumper for a muscular look, or exiting out behind the rear tires on each side of the truck. The side exits are the ideal tailpipe location when towing a boat or RV. The tailpipes are finished off with large 3.00-inch polished dual-wall stainless steel tips. The system includes all necessary parts and hardware for an easy installation and is covered by our Lifetime Limited Warranty. Notes: Fits all 2007*-2008 (*except classic body) GM 1500 4.8, 5.3L 2/4 wheel drives (except Extended Cab with 8-ft bed) and all 2009-2013 GM 1500 5.3L Extended Cab with 6.5-ft bed and Crew Cabs with 5.5-ft bed Only.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Large 3.00-inch Polished Stainless Steel Tips
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Lifetime Limited Warranty
- Easy Installation
Information:
2007*-2013 GM (*not classic body) Silverado/Sierra 1500 with 5.3L engine. Fits all 2007-2008 GM 1500 4.8L, 5.3L 2/4 wheel drives (except Extended Cab with 8-ft bed) and all 2009-2013 GM 1500 5.3L Extended Cab with 6.5-ft bed and Crew Cabs with 5.5-ft bed only.
Application Summary:
| Year |
Make/Model |
| 2007-2013 |
Chevrolet Silverado 1500 |
| 2007-2013 |
GMC Sierra 1500 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B003YBRM76 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
13.00 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear Same Side, Dual Split Side |
| Exit Style |
Straight |
| GTIN |
00700042024018 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
22.00 |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
