2000-2006 Jeep Wrangler TJ with 4.0L engine. - Mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. As a Force II® system it produces a mild-moderate interior and exterior tone, and is suited to customers looking for efficiency improvements without too aggressive of a tone. The system is constructed from 2.50-inch mandrel-bent stainless steel flowing into a 60 Series™ performance muffler for a mild-moderate exhaust note. The mandrel-bent tailpipe uses the factory hanger locations, tucks up high in the chassis for good off-roading clearance and is finished off with a brushed stainless steel tip. Especially recommended for daily drivers or people who want a mild performance tone. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts, hardware and our Lifetime Limited Warranty. Note: Does Not fit extended wheelbase Unlimited model.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Large 3.00-inch Brushed Stainless Steel Tip
- Mild Performance Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- 60 Series Performance Muffler
- Lifetime Limited Warranty
Information:
Fits 2000-2006 Jeep Wrangler TJ with 4.0L engine, fits 2/4 wheel drive models. Does Not fit extended wheelbase Unlimited model.
Application Summary:
| Year |
Make/Model |
| 2000-2006 |
Jeep TJ |
| 2000-2006 |
Jeep Wrangler |
| Attributes |
| 2WD/4WD |
4WD |
| ASIN |
B004JPLG2S |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Stock to mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Single |
| Exit Position |
Single Rear, Single Rear Exit |
| Exit Style |
Straight |
| GTIN |
00700042024087 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
1 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
60 Series Delta Flow |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
1 |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
