2009-2014 Ford F-150 with 4.6L, 5.0L or 5.4L engine. Fits 2/4 wheel drive and all wheelbases. - Moderate sound
Our Force II® cat-back exhaust system for 2009-2014 Ford F-150 trucks is perfect for the person looking for a mild to moderate interior tone with a moderate exterior sound level and all the performance benefits you expect from Flowmaster®. This bolt-on exhaust comes with your choice of either dual out the rear under the bumper for a muscular look, or dual out the sides behind the rear wheels, which is ideal for towing. Features include a stainless steel mandrel-bent 3.00-inch inlet tube flowing into a Super 50™ Series performance muffler exiting into dual 2.50-inch mandrel-bent tailpipes for maximum performance and sound. The tailpipes clear the factory spare tire and feature large 3.50-inch polished stainless steel tips. The system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for easy installation you can do at home. Note: Fits 2/4 wheel drive and all wheelbases.
- Includes Hangers and Hardware for an Easy Installation
- Lifetime Limited Warranty
- Easy Installation
- Large 3.50-inch Polished 304 Stainless Steel Tips
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Clears the Factory Spare Tire
- Two Choices of Tailpipe Exits
Information:
2009-2014 Ford F-150 with 4.6L, 5.0L or 5.4L engines. Fits 2/4 wheel drive and all wheelbases.
Application Summary:
| Year |
Make/Model |
| 2009-2014 |
Ford F-150 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0035J83CA |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear Same Side, Dual Split Side |
| Exit Style |
Straight |
| GTIN |
00700042023677 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
1 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
