2009-2024* (*Classic Body) RAM 1500 with 5.7L Hemi engine, and 2009-2013 4.7L models. - Aggressive sound
Wake up the power and performance of your 5.7L Hemi-powered 2009-2024* (*classic body) RAM 1500, and 2009-2013 4.7L models, with the American Thunder® Cat-back exhaust system. The system is fully constructed from 16-gauge mandrel-bent stainless steel tubing flowing into a 50 Series HD™ performance muffler with minimal interior drone in the cab, but with a moderately deep aggressive exterior tone. This custom system features dual 2.50-inch mandrel-bent tailpipes finished off with a pair of large 4.00-inch polished stainless steel tips exiting straight out the back under the rear bumper for a muscular look. The system includes all necessary parts and hardware required for an easy installation that you can do at home. Covered with our Lifetime Limited Warranty.
- For RAM Trucks with Exhaust Cutouts in Rear Bumper
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Dual Outlet 50 Series HD Performance Muffler
- Moderatley Aggressive Exterior Exhaust Tone
- Polished 4.00-inch Stainless Steel Tips
- Uses the Factory Hanger Locations
- Clears the Factory Spare Tire
- Lifetime Limited Warranty
- Easy Installation
Information:
Fits 2009-2024* (*Classic Body) RAM 1500 with 5.7L Hemi Magnum, 2009-2013 4.7L models, 2/4 Wheel Drive, All Wheelbases (Does not fit trucks with factory single exit tailpipe or 2019-2024 New Body.)
Application Summary:
| Year |
Make/Model |
| 2009-2010 |
Dodge Ram 1500 |
| 2011-2018 |
Ram 1500 |
| 2019-2024 |
Ram 1500 Classic |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0035JHO70 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042023660 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
1 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
50 Series HD |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
