2000-2006 Toyota Tundra with 4.7L engine. - Aggressive to moderate sound
This Flowmaster American Thunder® cat-back exhaust system for the 2000-2006 Toyota Tundra trucks with the 4.7L engine is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster®. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent stainless steel tubing flowing into a specially designed resonator and a Super 50™ Series performance muffler for a deep powerful exterior sound with minimal interior drone. The dual 2.50-inch stainless steel tailpipes use the factory hanger locations for an easy installation and include two choices for tailpipe exits, either behind the rear wheels, which is ideal for towing or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips and is covered by our Lifetime Limited Warranty. The system includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all stainless steel construction with a 3-year Limited Warranty, check out exhaust system #17425. Notes: Fits both 2/4 wheel drive models and all wheelbases.
- Includes Hangers and Hardware for an Easy Installation
- Choice of Two Tailpipe Exit Locations
- Uses the Factory Hanger Locations
- Lifetime Limited Warranty
- Easy Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Moderately Aggressive Exterior Exhaust Tone
- Connects After Factory Catalytic Converter
- Dyno Tuned for Maximum Performance
- 3.00-inch Polished Stainless Steel Tips
- Super 50 Series Performance Muffler
Information:
Fits 2000-2006 Toyota Tundra with 4.7L engine. Fits both 2/4 wheel drive models and all wheelbases.
Application Summary:
| Year |
Make/Model |
| 2000-2006 |
Toyota Tundra |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B005CUG55C |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate to Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Connects After Factory Catalytic Converter |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
13.00 |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear Same Side, Dual Side |
| Exit Style |
Straight |
| GTIN |
00700042024681 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
17.25 |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| Resonator (Front) Body Height |
4.00 |
| Resonator (Front) Body Length |
9.00 |
| Resonator (Front) Body Width |
8.00 |
| Resonator (Front) Type |
Chambered |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
