Fits 1964-1966 Mustang, 2.50-inch stainless steel system. - Aggressive to moderate sound
This American Thunder® crossmember-back exhaust system is designed for all 1964-1966 Ford Mustang hardtop coupes with a V8 engine. The system features a free-flowing 2.50-inch mandrel-bent stainless steel H-pipe flowing into a pair of 40 Series Delta Flow® mufflers for maximum power and that deep iconic sound. The 2.50-inch mandrel-bent stainless tailpipes tuck up high and are finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Includes all necessary parts, hardware and easy to follow instructions and is covered by our Lifetime Limited Warranty. Note: Does Not fit GT models or convertibles.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- 40 Series Delta Flow Performance Mufflers
- Long Polished Stainless Steel Tips
- Includes Built-in "H" Balance Pipe
- Moderate Exterior Exhaust Tone
- Lifetime Limited Warranty
- Crossmember-back System
Information:
Does not fit GT or convertible models.
Application Summary:
| Year |
Make/Model |
| 1964-1966 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B005CUGBZ6 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder |
| Exhaust Tip Length |
29.125 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042024605 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5, N/A |
| Inlet Size (in.) |
2.5, N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Body Height |
4.00 |
| Muffler Body Width |
9.50 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
40 Series Delta Flow |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
2 |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Type |
Crossmember-back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
