Fits 1968-1972 GM A-Body with a V8 engine. 3.0 inch Stainless Steel - Aggressive sound
This crossmember-back American Thunder system is custom designed for high horsepower and large cubic inch engines in 1968-1972 GM A-Bodies with a V8 engine. It's a true-dual exhaust system featuring all mandrel-bent 3.00-inch stainless steel tubing with a built-in H-pipe crossover assembly flowing into a pair of large cased Super 40 Series performance mufflers for maximum power and a deep powerful aggressive exhaust note. The large 3.00-inch mandrel-bent tailpipes are custom bent to tuck up high above the rear end and exit with a slight turn down under the rear bumper. The system is constructed from 409 stainless steel for maximum durability, includes all necessary hardware and hangers for installation and is covered by our Lifetime Limited Warranty. This system is also available in Aluminized steel and comes with a 3-year Limited Warranty, check out part# 17200.
- Super 40 Series Performance Mufflers for Deep Powerful Sound
- H-pipe Crossover for Maximum Power and Deep Tone
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Includes Hangers and Hardware for Installation
- Crossmember-back True Dual Exhaust System
- Large 3.00-inch Stainless Steel Tubing
- Does Not Include Header Reducers or Factory Manifold Downpipes
- Aggressive Exterior Exhaust Tone
- Lifetime Limited Warranty
Information:
System does not include header reducer cones or downpipes for factory manifolds
Application Summary:
| Year |
Make/Model |
| 1970-1972 |
Buick GS |
| 1968-1969 |
Buick GS 350 |
| 1968-1969 |
Buick GS 400 |
| 1970-1972 |
Buick GS 455 |
| 1968-1972 |
Buick Skylark |
| 1968-1969 |
Buick Special |
| 1968-1972 |
Buick Sportwagon |
| 1968-1972 |
Chevrolet Chevelle |
| 1968-1972 |
Chevrolet El Camino |
| 1970-1972 |
Chevrolet Monte Carlo |
| 1971-1972 |
GMC Sprint |
| 1968-1971 |
Oldsmobile 442 |
| 1968-1972 |
Oldsmobile Cutlass |
| 1968-1972 |
Oldsmobile Cutlass Supreme |
| 1968-1972 |
Oldsmobile F85 |
| 1968-1972 |
Oldsmobile Vista Cruiser |
| 1968-1972 |
Pontiac Grand Prix |
| 1968-1972 |
Pontiac GTO |
| 1968-1972 |
Pontiac LeMans |
| 1968-1970 |
Pontiac Tempest |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B0069IDZ9K |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042025558 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Width |
10.00 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 40 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tube Diameter |
3 inch, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Crossmember-back |
| Type of Exhaust |
Header-Back, Crossmember-back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
