Fits 1965-1968 Pontiac GTO, Tempest, Lemans.
These Flowmaster manifold downpipes are specifically designed for all 1965-1968 Pontiac A-Body vehicles with either a 389 or 400 c.i. Pontiac engine and are manufactured from 2.50-inch mandrel-bent 409S stainless steel tubing with high quality flanges. These Only fit with manifold castings 9779032-D/S and 9779328-P/S and include the factory 2-bolt flanges. Covered by our Lifetime Limited Warranty.
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- To Adapt Exhaust to Factory Manifolds
- Large 2.50-inch Manifold Downpipes
- Stainless Steel Construction
- Lifetime Limited Warranty
- Flowmaster Quality
- Includes Hardware
- Easy Installation
Information:
Fits 1965-1968 Pontiac A-Body vehicles with 389/400 V8 engines. Fits Only with Manifold Castings 9779032-D/S and 9779328-P/S.
Application Summary:
| Year |
Make/Model |
| 1965-1968 |
Pontiac GTO |
| 1968 |
Pontiac LeMans |
| 1968 |
Pontiac Tempest |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B00GZCVHL8 |
| Bend Angle |
N/A |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Includes Hardware |
| Bullet Point #3 |
Great Fit |
| Bullet Point #4 |
Lifetime Limited Warranty |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Center Line Radius |
N/A |
| Clamping Type |
Flat Band |
| Clamps Included |
No |
| Color |
Silver |
| Country of Origin (Primary) |
US |
| Diameter Outside (in.) |
OEM |
| Emission Code |
3, 3, Off Road |
| Finish |
Natural, Natural |
| Flanged Inlet |
Yes |
| Flanged Outlet |
No |
| GTIN |
00700042030064 |
| Gasket Or Seal Included |
No |
| Gauge |
OEM |
| Grade Type |
Performance |
| Hanger Included |
No |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Attachment Type |
Bolt-On |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
2.250 in. |
| Inlet Inside Diameter (in.) |
2.25 |
| Leg/Straight Length |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.50, 2-1/2 |
| Material |
Stainless Steel, Stainless Steel |
| Mounting Bracket Included |
No |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment Type |
Weld-On, Clamp-On |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Inside Diameter |
2.37 |
| Outlet Outside Diameter |
2.50 |
| Pipe Diameter |
2.50 |
| Pipe Material |
Stainless Steel |
| Position |
N/A |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| Quantity |
1 Pair |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Shape |
Downpipe |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sub Category |
Exhaust Manifolds, Exhaust Manifolds |
| Subcategory |
Miscellaneous Exhaust |
| System Type |
Manifold Down Pipe, Manifold Downpipes |
| Tube Diameter |
2.500 in. |
| Tube Size |
2.5 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust Manifold Down Pipe, Exhaust Manifold Down Pipe |
