Fits 2020-2025 Jeep Gladiator with 3.6L engine, 409 Stainless Steel, Single Exit with Black Tip - Aggressive to moderate sound
Introducing the new Flow FX™ cat-back exhaust system for the 2020-2025 Jeep Gladiator with 3.6L engine. This stainless steel performance exhaust system starts with large 3-inch mandrel-bent tubing flowing into the Flow FX "straight-through" performance muffler. The mandrel-bent tailpipe exits behind the passenger side rear tire and is finished off with a large 4.50-inch black ceramic coated exhaust tip embossed with the Flowmaster® name. This system creates a deep powerful sound outside the vehicle with a moderate tone inside the cab and utilizes the factory hanger locations. Includes all necessary parts, hardware and detailed instructions for an easy installation you can do at home.
- Large 4.5-inch Black Ceramic Coated Stainless Steel Tip
- Deep Powerful Tone Inside and Outside the Vehicle
- FlowFX "Straight-through" Performance Muffler
- Mandrel-bent Stainless Steel Tubing
- Uses the Factory Hanger Locations
- Includes All Necessary Hardware
- Stainless Steel Construction
- Lifetime Limited Warranty
Information:
Fits all 2020-2024 Jeep Gladiator trucks.
Application Summary:
| Year |
Make/Model |
| 2020-2025 |
Jeep Gladiator |
| Attributes |
| Brand |
Flowmaster, Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
FlowFX, FlowFX |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
11.00 |
| Exhaust Type |
Single |
| Exit Position |
Pass Side Behind Rear Tire, Single Rear Exit |
| GTIN |
00700042039579 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
14.00 |
| Muffler Body Width |
9.00 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Series |
FlowFX, FlowFX |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Exhaust, Exhaust System |
| SDR Required Flag |
N |
| Series |
FlowFX Exhaust Kits |
| Sound Level |
Aggressive / Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat-back, Cat-back |
| Tail Pipe Diameter |
4.500 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
4.500 in., 4.50 |
| Tip Diameter (in) |
4.5 |
| Tip Finish |
Black Ceramic, Black Ceramic Coating |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Warning |
California Proposition 65, California Proposition 65 |
| part type |
Exhaust System Kit, Exhaust System Kit |
