1986-2001 Jeep Cherokee XJ 2.5L, 4.0L engine and 2 or 4WD. - Moderate sound
This Flow FX cat-back exhaust system is designed for all 1986-2001 Jeep Cherokee XJ with a 2.5L or 4.0L engine and features stainless steel construction for added durability and mandrel-bent tubing for free unrestricted flow. The "straight-through" Flow FX performance muffler attaches just behind the catalytic converter and delivers a moderate deep powerful sound while the mandrel-bent stainless tailpipe tucks up high in the undercarriage for additional clearance, protecting it from being crushed when traversing rocky terrain. The system uses the factory tailpipe hanger locations and is finished off with a 3.00-inch polished stainless steel tip embossed with the Flowmaster name. The kit includes detailed instructions and all hardware necessary for a quick and easy installation you can do at home. Covered by our Lifetime Limited Warranty. Note: Fits All 2/4 Wheel drive models including 2 door models. Does NOT fit Grand Cherokee models.
- FlowFX Straight-through Performance Muffler
- Uses the Factory Hanger Locations
- Includes All Necessary Hardware
- Full Stainless Steel Construction
- Polished 304 Stainless Steel Tip
- Deep and Powerful Sound
- Easy at Home Installation
- Lifetime Limited Warranty
Information:
Fits All 1986-01 Jeep Cherokee XJ with 2.5L or 4.0L engine. Fits All 2/4 Wheel drive models including 2 door models. Does NOT fit Grand Cherokee models.
Application Summary:
| Year |
Make/Model |
| 1986-2001 |
Jeep Cherokee |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
FlowFX |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
4.75 |
| Exhaust Type |
Cat-Back |
| Exit Position |
Side Out Rear, Single Rear Exit |
| GTIN |
00700042039449 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Inlet Inside Diameter |
2.500 in. |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers |
| Muffler Body Diameter |
4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
14.000 in. |
| Muffler Body Length (in) |
14 |
| Muffler Body Width |
4.00 |
| Muffler Color |
Natural, Silver |
| Muffler Finish |
Brushed |
| Muffler Inlet Diameter |
2.5, 2.50 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Location |
Centered, Center |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
2.5, 2.50 |
| Muffler Outlet Location |
Centered, Center |
| Muffler Overall Length |
20.00 |
| Muffler Overall Length (in) |
20 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
FlowFX |
| Muffler Shape |
Round |
| Muffler Type |
Absorbtion |
| NAFTA Preference Criterion Code |
B |
| Product Type |
Cat-Back Exhaust, Exhaust System |
| SDR Required Flag |
N |
| Sale Category |
Exhaust |
| Series |
FlowFX Exhaust Kits |
| Single Dual |
Single |
| Sound Level |
Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Cut |
Angle |
| Tip Diameter |
3.000 in., 3 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
4.75 |
| Tip Logo |
Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tip Style |
Single Wall |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Warning |
California Proposition 65 |
| part type |
Exhaust System Kit |
