Fits 1967-1972 Chevrolet/GMC C10, C15 1/2 Ton trucks with V8 engine. - Aggressive to moderate sound
This American Thunder exhaust system is specifically designed for 1967-1972 Chevrolet and GMC C10 and C15 1/2 ton 2wd trucks with coil spring suspension. The system is perfect for the person looking for a moderate to aggressive interior and exterior sound level. Starting at the crossmember-back, the exhaust comes complete with a built-in H-pipe crossover, all mandrel-bent 2.50-inch aluminized steel tubing, a pair of Super 44 Series performance mufflers, and your choice of four tailpipe exits. One set slightly angled down to clear larger rear bumpers, one set straight out the back under the rear bumper, out the sides behind the rear tires for that classic truck look or a dump style exiting behind the rear tires level with the body. The system includes all hardware necessary for installation and provides adequate clearance for substantially lowered vehicles. The exhaust system is covered by our 3-year Limited Warranty. If you prefer Stainless Steel construction, check out system# 817654 which comes with our Lifetime Limited Warranty. Notes: Fits both short and long wheelbase trucks.
- Super 44 Series Mufflers for Deep Powerful Sound
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Includes Hangers and Hardware for Installation
- Aggressive to Moderate Exterior Exhaust Tone
- Crossmember-back True Dual Exhaust System
- H-pipe Crossover for Maximum Power
- Does Not Include Header Reducers or Downpipes for Factory Manifolds
- Four Choices of Tailpipe Exits
Information:
Does Not include exhaust tips, header reducer cones or downpipes for factory manifolds.
Application Summary:
| Year |
Make/Model |
| 1967-1972 |
Chevrolet C10 Pickup |
| 1967-1972 |
GMC C15/C1500 Pickup |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B00DOV4IBO |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent |
| Bullet Point #2 |
Famous Flowmaster sound |
| Bullet Point #3 |
Premium Quality |
| Bullet Point #4 |
Lifetime limited warranty |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear Same Side, Dual Out Rear / Dual Out Side |
| Exit Style |
Straight |
| GTIN |
00700042029891 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel |
| Muffler Body Height |
4.00 |
| Muffler Body Width |
9.75 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 44 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Truck Bed Length |
Long Bed, Short Bed |
| Tube Diameter |
2.5 inch, 2.50 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Type |
Crossmember-back |
| Type of Exhaust |
Header-Back, Crossmember-back |
| Warranty Time |
36 |
