Fits 2005-2010 Dodge Dakota trucks with V6 or V8 engine. Fits both 2 and 4 wheel drive models. - Moderate sound
This Flowmaster Force II® cat-back exhaust system is custom designed for 2005-2010 Dodge Dakota trucks with V6 or V8 engines and is perfect for the person looking for a moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a mandrel-bent aluminized steel inlet pipe flowing into a Super 50™ Series muffler for a moderate performance exterior sound. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a large 3.50-inch polished embossed stainless steel tip. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts, hardware and instructions for a quick and easy installation you can do at home. Note: Fits 2/4 wheel drive models and all wheelbases.
  • Includes Hangers and Hardware for an Easy Installation
  • Mandrel-bent 16 Gauge Aluminized Steel Tubing
  • Large 3.50-inch Polished 304 Stainless Steel Tip
  • Moderate Performance Exterior Exhaust Tone
  • Dyno Tuned for Maximum Performance
  • Super 50 Series Performance Muffler
  • Uses the Factory Hanger Locations
  • 3-year Limited Warranty

Information:

Fits 2005-2010 Dodge Dakota trucks with V6 or V8 engine. Fits 2/ 4 wheel drive models.

Application Summary:

Year Make/Model
2005-2010 Dodge Dakota
Attributes
2WD/4WD 2WD, 4WD
ASIN B0035J82O4
Brand Flowmaster, Flowmaster
Bullet Point #1 Mandrel bent 16 Gauge Tubing
Bullet Point #2 Mild to Moderate Sound exterior exhaust tone
Bullet Point #3 Includes hangers and hardware for easy installation
Bullet Point #4 Dyno tuned for maximum performance
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Catalytic Converter Quantity Not Included
Category Exhaust, Exhaust
Country of Origin (Primary) US
Emission Code 5, 5
Exhaust Series Force II, Force II
Exhaust System Kit Type Cat-Back, Cat-Back
Exhaust Tip Length 12.00
Exhaust Type Single
Exit Position Single Side, Single Side Exit
Exit Style Straight
GTIN 00700042022045
Harmonized Tariff Code (Schedule B) 8708925000
Hazardous Material Code N
Heat Shield No, No
Heat Shield Attached No
Inlet Diameter 2.500 in., 2.50
Inlet Diameter (in) 2.5
Inlet Inside Diameter 2.500 in.
Inlet Inside Diameter (in.) 2.5, 2.75
Inlet Size (in.) 2.5, 2.75
Life Cycle Status Code Available to Order
Material Aluminized Steel, Aluminized Steel
Muffler Body Height 5.00, 5.00
Muffler Body Length 17.00, 17.00
Muffler Body Width 10.00, 10.00
Muffler Count 1
Muffler Inlet Inside Diameter 3.00, 3.00
Muffler Inlet Outside Diameter 3.13, 3.13
Muffler Part Number 53058, 53058
Muffler Quantity 1
Muffler Series Super 50 Series, Super 50 Series
Muffler Type Chambered
NAFTA Preference Criterion Code B
Outlet Diameter 3.000 in., 3.00
Outlet Diameter (in) 3
Outlet Outside Diameter 3.000 in.
Outlet Outside Diameter (in.) 3
Outlet Size (in.) 3
Product Type Exhaust Systems / Kits, Exhaust System
SDR Required Flag N
SDS Sheet Number N
Series Force II Exhaust Systems
Single Dual Single, Single
Single or Dual Single
Sound Level Mild, Moderate
Sub Category Exhaust and Tail Pipes, Exhaust and Tail Pipes
Subcategory Cat-Back Exhaust Kits
System Type Cat Back, Cat-back
Tail Pipe Diameter 2.500 in.
Tail Pipe Outlet Outside Diameter 3.00, 3.00
Tip Diameter 3.500 in., 3.50
Tip Diameter (in) 3.5
Tip Diameter (in.) 3.5
Tip Quantity 1, 1
Tip Size 3.5 in.
Tubing Diameter 2.500 in., 3.00
Tubing Diameter (IN) 2.5, 3
Warning California Proposition 65, California Proposition 65
Warranty Time 36
part type Exhaust System Kit, Exhaust System Kit

Write a review.

Note: HTML is not translated.
    Bad           Good

Flowmaster 17458 05-10 DODGE DAKOTA FII SOS

Product Information

Call for Pricing

Vehicle Fitment