Fits 2008-2013 Ford F-250/F-350 truck with V8 or V10 engine. - Mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. This Force II® system is constructed mandrel-bent 3.00-inch aluminized steel tubing flows into a 70 Series Big Block II™ performance muffler keeping things mellow inside the cab area of the vehicle. The system uses the factory hanger locations and the 3.00-inch tailpipe is finished off with a large 3.50-inch polished stainless steel tip. Like all Flowmaster systems, benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation and is covered by our 3-year Limited Warranty. For those who prefer all stainless steel construction with a Lifetime Limited Warranty, check out part# 817446. Note: Fits both 2 and 4 wheel drive models and all wheelbases.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Large 3.50-inch Polished Stainless Steel Tip
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- 70 Series Performance Muffler
- Quick & Easy Installation
Information:
Fits 2008-2013 Ford F-250/F-350 truck with V8 or V10 engine. Fits 2 and 4-wheel drive models and all wheelbases.
Application Summary:
| Year |
Make/Model |
| 2008-2013 |
Ford F-250 Super Duty |
| 2008-2013 |
Ford F-350 Super Duty |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0035JG0KC |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
12.00 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042021819 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Height |
5.00, 5.00 |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Width |
10.00, 10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Part Number |
53073, 53073 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block, 70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
1, 1 |
| Tip Size |
3.5 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit, Exhaust System Kit |
