Fits 2006-2008 Dodge Ram 1500 with 4.7L engine. - Moderate to mild sound
This Flowmaster American Thunder® cat-back exhaust system for the 2006-2008 Dodge Ram 1500 trucks with the 4.7L engine is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster®. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent aluminized steel tubing flowing into a specially designed Super 50™ Series performance muffler with dual 2.50-inch aluminized steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all stainless steel construction with a Lifetime Limited Warranty, check out exhaust system #817424. Note: Fits 2/4 wheel drive models all wheelbases Except MegaCab.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Moderately Aggressive Exterior Exhaust Tone
- Dual 3.00-inch Polished Stainless Steel Tips
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- Choice of Two Tailpipe Exits
- 3-year Limited Warranty
Information:
Fits 2006-2008 Dodge Ram 1500 truck with 4.7L engine, fits 2/4 wheel drive and all wheelbases except Mega Cab.
Application Summary:
| Year |
Make/Model |
| 2006-2008 |
Dodge Ram 1500 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000QJJ45M |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
13.00 |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear Same Side, Dual Out Rear / Dual Out Side |
| Exit Style |
Straight |
| GTIN |
00700042020751 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
17.00 |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Inlet Outside Diameter |
3.13 |
| Muffler Part Number |
530552, 530552 |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild/Moderate, Moderate/Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2, 2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
