2004-2008 Ford F-150 and Lincoln Mark LT trucks with 4.6L or 5.4L engine. - Mild sound
The Force II® system is the perfect choice for the person who wants a subtle custom appearance with all the benefits and sound that a Flowmaster® single cat-back exhaust provides. The system delivers a moderate exterior tone and mild to moderate interior tone over the factory exhaust and ideally suited for customers looking for efficiency improvements without a lot of noise. This Force II system is a bolt-on system and bumps the tubing size up to a 3.00-inch mandrel-bent aluminized steel tubing flowing into the improved muffler design of the Super 50™ Series muffler over the stock exhaust. The mandrel-bent tailpipe uses the factory hanger locations making installation a breeze and is finished off with a 3.50-inch polished stainless steel tip. The Force II system is ideal for daily drivers and especially light towing applications such as boats and RV's. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation you can do at home. Aluminized Steel exhaust systems are covered by our 3-year Limited Warranty Note: This Force II system is also available in Stainless Steel with a Lifetime Limited Warranty. Check out part# 817403. Fits both 2/4 wheel drive models and all wheelbases.
- Includes Hangers and Hardware for an Easy Installation
- Mild Exterior Exhaust Tone
- 3-year Limited Warranty
- Minimal Interior Tone
- Flowmaster Quality
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Large 3.50-inch Polished 304 Stainless Steel Tip
- Dyno tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- All Aluminized Steel Construction
Information:
Fits 2004-2008 Ford F-150 and Lincoln Mark LT trucks with 4.6L or 5.4L engine. Fits both 2/4 wheel drive models and all wheelbases.
Application Summary:
| Year |
Make/Model |
| 2004-2008 |
Ford F-150 |
| 2004 |
Ford F-150 Heritage |
| 2006-2008 |
Lincoln Mark LT |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000QJMYPE |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Stock to mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
12.00 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042020201 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Height |
5.00, 5.00 |
| Muffler Body Length |
10.00, 10.00 |
| Muffler Body Width |
10.00, 10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Part Number |
53055, 53055 |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
1, 1 |
| Tip Size |
3.5 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit, Exhaust System Kit |
