1999-2007* (*Classic body) Chevrolet/GMC 1500 with a 4.3L, 4.8L or 5.3L engine. - Mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides, the S.O.S. (single out side) systems are the perfect choice. This Force II® system delivers a moderate exterior tone and mild interior tone, and is suited to customers looking for efficiency improvements without a lot of noise. The system is constructed from 3.00-inch mandrel-bent aluminized tubing flowing into a Super 50 Series™ muffler for a moderate exterior tone with a mild to moderate interior tone. This system is especially recommended for towing applications since the tailpipe exits behind the right side rear wheel. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models with a Standard Cab/Short bed configuration with 119-inch wheelbase.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Tubing
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Sound
- 3-year Limited Warranty
- Great Choice for Towing
- Easy Installation
Information:
1999-2007* (*2007 Classic body) Chevrolet/GMC 1500 with a 4.3L, 4.8L or 5.3L engine. Fits 2/4 wheel drive models with a Standard Cab/Short bed configuration on a 119 inch wheelbase.
Application Summary:
| Year |
Make/Model |
| 1999-2006 |
Chevrolet Silverado 1500 |
| 2007 |
Chevrolet Silverado 1500 Classic |
| 1999-2006 |
GMC Sierra 1500 |
| 2007 |
GMC Sierra 1500 Classic |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CNHDJQ |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
12.00 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042018819 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Height |
5.00, 5.00 |
| Muffler Body Length |
17.00, 17.00 |
| Muffler Body Width |
10.00, 10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Part Number |
53056, 53056 |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
1, 1 |
| Tip Size |
3.5 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit, Exhaust System Kit |
