2000-2006 Chevrolet Tahoe and GMC Yukon with a 4.8L or 5.3L engine. - Mild sound
This Force II® Cat-back aluminized steel exhaust system is designed for 2000-2006 Chevrolet Tahoe and GMC Yukon with a 4.8L or 5.3L engine. Features include large 3.00-inch mandrel-bent tubing flowing into a Flowmaster 50 Series Big Block™ muffler for a muscular exterior sound, while the built-in Helmholtz chamber helps control the interior resonance. The system uses the factory hanger locations for an easy installation and is finished off with a highly polished 3.50-inch 304 stainless steel tip embossed with the Flowmaster® logo. This bolt-on system delivers noticeable performance gains while offering moderate interior and exterior sound levels and is covered by our 3-year Limited Warranty. Note: Fits 2 and 4 wheel drive models. For the person interested in a full stainless steel exhaust system covered with our Lifetime Limited Warranty, check out system # 817344.
- Includes Hangers and Hardware for an Easy Installation
- 3-year Limited Warranty
- Minimal Interior Sound
- Large 3.50-inch Polished 304 Stainless Steel Tip
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- 50 Series Big Block Performance Muffler
- Dyno Tuned for Maximum Performance
- Mild-Moderate Exterior Exhaust Tone
- Uses the Factory Hanger Locations
- Quick and Easy Installation
Information:
Fits 2000-2006 Chevrolet Tahoe and GMC Yukon with a 4.8L or 5.3L engine. Fits 2 and 4 wheel drive models.
Application Summary:
| Year |
Make/Model |
| 2000-2006 |
Chevrolet Tahoe |
| 2000-2006 |
GMC Yukon |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CEG2EC |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
7.50 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042017843 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler (Front) Body Height |
4.00, 4.00 |
| Muffler (Front) Body Length |
12.25, 12.25 |
| Muffler (Front) Body Width |
8.00, 8.00 |
| Muffler (Rear) Body Height |
5.00, 5.00 |
| Muffler (Rear) Body Length |
17.00, 17.00 |
| Muffler (Rear) Body Width |
10.00, 10.00 |
| Muffler Body Height |
5.00, 5.00 |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Width |
12.00, 12.00 |
| Muffler Count |
1 |
| Muffler Part Number |
53051, 53051 |
| Muffler Quantity |
1 |
| Muffler Series |
50 Series Big Block, 50 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
1, 1 |
| Tip Size |
3.5 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit, Exhaust System Kit |
