Fits 1996-1999 Chevrolet Silverado, GMC Sierra 1500 with 5.7L engine. - Moderate sound
This Flowmaster Force II® cat-back exhaust system is custom designed for 1996-1999 Chevrolet Silverado / GMC Sierra 1500 with 5.7L engine and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a flanged inlet with dual pipes flowing into a Scavenger Series Y-collector for maximum scavenging and torque gains as it transitions into the large 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 70 Series Big Block II™ performance muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a turndown style tip that exits behind the right rear wheel and uses the factory hanger locations. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home.
- Includes Aluminum Heat Shield and Stainless Steel Clamps
- Ideal for Towing Applications
- Quick and Easy Installation
- Scavenger Series Y-Collector for Maximum Torque Gains
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- 70 Series Big Block II Performance Muffler
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Note
Information:
Fits 1996-1999 Chevrolet Silverado/GMC Sierra 1500 with 5.7L engine using dual flanged catalytic converters. Fits both 2/4 wheel drive models in the extended cab/short bed configuration with 141-inch wheelbase.
Application Summary:
| Year |
Make/Model |
| 1996-1998 |
Chevrolet C1500 |
| 1996-1999 |
Chevrolet K1500 |
| 1996-1997 |
GMC C1500 |
| 1996-1999 |
GMC K1500 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CEBWM4 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Quantity |
Sold Separately, Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042013654 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Height |
5.00, 5.00 |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Width |
10.00, 10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Part Number |
53072, 53072 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block, 70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Moderate, Moderate |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
3 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit, Exhaust System Kit |
