1999-2004 Ford F-250, F-350 trucks Super Duty chassis with a V8 or V10 engine. - Moderate to mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster® Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II® systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. The system is constructed from large 3.00-inch aluminized steel tubing flowing into a specially selected 70 Series™ Big Block II muffler™. The 3.00-inch mandrel-bent tailpipe exits out behind the right rear wheel with a slight angle cut at the end of the tubing, leaving you the option of choosing your own style of tip if you desire. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models on 133-inch, 155-inch or 168.4-inch wheelbases.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Tubing
- 70 Series Big Block II Performance Muffler
- Dyno Tuned for Maximum Performance
- Bolt-on Cat-back Exhaust System
- Moderate Exterior Exhaust Tone
- Uses the Factory Hangers
- 3-year Limited Warranty
- Flowmaster Quality
Information:
Fits 1999-2004 Ford F-250 and F-350 truck with a V8 or V10 engine, fits 2 and 4 wheel drive models on 133-inch, 155-inch or 168.4-inch wheelbases.
Application Summary:
| Year |
Make/Model |
| 2014 |
Chrysler 200 |
| 2007 |
Chrysler 300 |
| 1989 |
Chrysler LeBaron |
| 2001 |
Chrysler LHS |
| 1999 |
Ford F-250 |
| 1999-2004 |
Ford F-250 Super Duty |
| 1999-2004 |
Ford F-350 Super Duty |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000QJG0ZY |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Quantity |
Sold Separately, Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042015368 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Part Number |
53073, 53073 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block, 70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single, Single |
| Single or Dual |
Single |
| Sound Level |
Mild/Moderate, Moderate/Mild |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit, Exhaust System Kit |
